Windows 10: connect 2 computers

Cannot connect Computer 1 to computer 2 on same home network. Continual permission problems. Whhat steps need to be taken to get these 2 computers to talk to each other?

:)

 

help to remote connect

not sure how to use both programs u 2 suggested, i need more helpful steps thanks

 

Unable to connect the Samsung Galaxy 2 Tablet on Windows 10 computer

Hi Arthur,

As you are facing issues accessing the Samsung tablet on Windows 10, do not worry we will help you with this issue.

Provide us additional information to assist you better with this issue:

• Were you able to detect the tablet under Device Manager?
• What is the complete error message/ error code of accessing the tablet on your computer?

Connect your tablet to computer try few of the below troubleshooting steps if not yet tried and check if it helps.

Step 1: I suggest you to check if there are any drivers with exclamatory mark in Device Manager.

• 
  Press Windows + X keys from the keyboard, click on
  Device Manager.
  
• 
  Check for the drivers with exclamatory mark in yellow triangle.
  
• 
  If so, right click on the driver, click on
  Properties and check the device status.
  

Step 2: If the device is not detected on your computer try to run Hardware and Devices troubleshooter.

Hardware and Devices troubleshooter
checks for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• 
  Press Windows
  key from the keyboard, type Troubleshooting and select it.
  
• 
  Click on view all option on the upper left corner of
  Troubleshooting window.
  
• 
  Select the Hardware and Device
  options from the list.
  
• 
  Click Next to run the
  Hardware and Device Troubleshooter.
  

Step 3: I suggest you to download the latest tablet software to access it on computer, install it in compatibility mode and check if it helps.

Refer to the Link to download the software.

Click on Support and download the Samsung kies.

Follow the steps to install in Compatibility mode:

• Right click the software installation file and select
  Properties then tap or click the Compatibility tab.
• Place a check in the Run this program in compatibility mode for: box.
  
• Tap the drop down box and select a previous operating system, then tap or click
  OK.
• Try installing the Samsung software and check.

Hope it helps. Reply to the post with an updated status of accessing the tablet on computer for further assistance.

Thank you.

 

Connecting computer with no internet connection to network printer


@dk1971

1. Open Admin command and type: ipconfig
   
   
   
2. Win+X->Control Panel->Netwok and Sharing Center
   Follow the screen shot. This should disable internet access from this PC but allows access to local device(s)
   NOTE: Use the IP & Subnet Mask from step 1. Leave Default gateway & DNS Server blank