Windows 10: 0xc0e90001 error and cannot reset PC

When I try to reset PC or do an advanced startup, the 0xc0e90001 error shows up after restarting the computer.And it's the blue screen which prompts that "your PC / device needs to be repaired".All the other things are OK, like login to the OS and any other general operations.My computer is Asus Zenbook A14 UX3407Q with Snapdragon X processor and Windows 11 on Arm. And I tried everything I can do, as reinstall the Windows 11 Arm, or SFC /scan within CMD, but the problem is still there.

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Resetting my PC doesn't work

HI Benjamin,

To further isolate the issue regarding with resetting your PC, kindly give us details on the following:

• Which steps have you tried already?
• Was there a specific error message?

We look forward to your response.

 

resetting the pc

Hi,

There is a possibility that this is due to software corruption. To properly isolate the issue, kindly verify the following:

• Have you performed Reset this PC option?
• Did you encounter any error messages?
• Any recent changes made on the computer prior to the issue?
• What troubleshooting steps have you done to fix the issue?
  

We're looking forward to your response.