Windows 10: Windows Update Error "Something went wrong"

Split from this thread. I have runned this Farbar Recovery Scan Tool 64-bit and these are the results Windows Update Problem,Please check and help me sir. i got the same errorThank You!

:)

 

Who has seen this vista update error

When you go to Windows vista update and it tell you to update a driver that you have already updated. Then it says failed to update and gives you the error code that tell you that you already have a never version than that. WTF? Why in the world would it be trying to updated something with an older driver. Well the only way to get it out of your windows update list is to go uninstall what ever that driver is then run the update and install it. Then run the newer drivers again.

Well I still can't get the Nivida Network Bridge to disappear out of the list. I uninstall the one in device manager and go to the update and before it's even done with that. Vista is automatically installing a newer version than is in the Vista update list.......

 

Windows Updates failed to instal

I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

Step 1 Register DLL files.

=================

By trying this step, we can check if the update engines are working properly.



1. Close all instances of Internet Explorer.

2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



Note: There is a space between regsvr32 and atl.dll



3. Similarly, one by one, register the files listed below:



Regsvr32 msxml3.dll

Regsvr32 wuapi.dll

Regsvr32 wuaueng.dll

Regsvr32 wuaueng1.dll

Regsvr32 wups2.dll

Regsvr32 wucltui.dll

Regsvr32 wups.dll

Regsvr32 wuweb.dll

Regsvr32 qmgr.dll

Regsvr32 qmgrprxy.dll

Regsvr32 jscript.dll



Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



Step 2 Verify the relevant Windows Update services.

=========================================

1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

2. Double click the service "Automatic Updates".

3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

6. Then please click the button "Start" under "Service Status" to start the service.

7. Please repeat the above steps with the other services:



Background Intelligent Transfer Service

Event Log

Remote Procedure Call (RPC)



Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



If it still does not help, let's proceed to step 3.



Step 3 Reload the Update temporary folders.

===================================

One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net stop WuAuServ



2. Click Start, Run, type: %windir% and press Enter.

3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net start WuAuServ



Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.

 

Should I update bios?

I would read the warranty before doing anything. If the manufacturer finds out you did something not on their approved list of steps,for example using a program they didn't list, or a bios, etc, they can treat your video card rma like you threw it against the wall , because if something goes wrong and you didn't follow their steps exactly ,it was damaged through human error and they're not likely going to be obligated to cover it warranty wise. I don't know for sure, I just advocate that you check first , and I also advocate that you verify that it's an actual update ,because very rarely do manufacturers release updates for gpu bios'. And they most certainly wont cover a GPU "update" if its a bios file written by some dude in the Ukraine, it has to be a set process, they have predetermined often.