Windows 10: Network settings in windows

Why is microsoft making networks settings increasingly more complicated instead of easier: This here is all we need

:)

 

Windows could not automatically detect this network's proxy settings

Hi Rik,

We value your time and so we want to avoid repeating troubleshooting steps that were already performed. Kindly share with us the troubleshooting steps that you have done from your end.

In the mean time, we suggest that you run the Network troubleshooter to diagnose and fix network problems. Refer to the steps below:

• Click on Start.
• Click on Settings.
• Click on Network & Internet.
• Under Change your network settings, click on Network troubleshooter.

Your reply is most important for us to assist you accordingly.

 

Help needed with simple wired network

Step one- Connect all PC's to router, and then the router to the modem. PC's go to router by the ports labeled "1-4" on the back of the router. WAN port goes to router. Power up all network equipment, and then systems.
Step two- Power on the computer connected to port one. Go into router settings at 192.168.0.1 and configure internet, dyndns, firewall, etc.
Step three- Go to "network set up wizard" in windows. (Network places- network set up wizard). The rest is self explanatory.
Step four- right click on each drive and printer you want to share, and then configure sharing preferences. Should be easy enough.
Step five- right click my computer, and the select "map network drive". Using the network address for each piece of hardware you shared, assign network drive letters.

Congratulations, you have a fully operational network. Happy Gaming! *Toast :toast:

 

Set Broadband Internet Connection Network Configuration

Hi,

Upon analyzing the details you have provided, kindly run the
Network and Internet Troubleshooter
and check if there's any changes. To run the
troubleshooter,
follow these steps:

• 
  On the search bar, type
  Troubleshooting.
  
• 
  Choose
  Network and Internet.
  
• 
  Run the following
  Troubleshooter:
  
  • 
    Internet Connections.
    
  • 
    Network Adapter.
    
  • 
    Incoming Connections.
    

If the issue persists, we suggest that you try to
renew
your
IP address. To do this, follow these steps:

• 
  Open
  Command Prompt
  as
  Administrator.
  
• 
  Type the following command:
  
  • 
    Ipconfig/release
    and hit
    Enter.
    
  • 
    Ipconfig/renew
    and hit
    Enter.
    
  • 
    Exit.
    

Let us know how it goes.

Regards.