Windows 10: PC regular BSOD with multiple different stop codes. Need help troubleshooting please.

Specs:CPU: Intel Core i7-4790 @ 3.60GHzGPU: GeForce GTX 1060 3GBMotherboard: MSI Z97 Gaming 5RAM: Corsair Vengeance 1600 MHz DDR3 16GB 4x4GBPSU: Corsair TX750 V2 750WSSD 1: Samsung 970 EVO Plus 1TB NVMe M.2SSD 2: Kingston HyperX 3K 120GBSSD 3: Samsung 840 EVO 120GB Hi, my PC has been experiencing regular crashes for over a year now, and I’ve been unable to find a solution so far. The crashes occur completely at random but happen on average about once a day. There are two types of crashes: Blue Screen of Death BSODComplete system freeze, requiring a hard reset Due to the variety of sto

:)

 

BSOD with multiple stop codes

• Problem
  

The problem is that I get a blue screen of death (BSOD) frequently for a few months now, and it increases in frequency once I've had the first one. For example, if I leave my computer on for a while, it'll run normally for a few hours before I get my first BSOD. After I get a BSOD, I get a lot more afterward over the period of 30 mins - 1 hour. The stop codes I get are different every time so there's no way of saying which one I get the most.

• Problem history
  

I don't remember exactly when I had this problem or what triggered it. But at the time I hadn't changed any hardware components or installed new software. However, I used to only get the stop code IRQL_NOT_LESS_OR_EQUAL. After some attempts of troubleshooting, I started getting all the stop codes besides IRQL_NOT_LESS_OR_EQUAL to this moment. I don't remember which step exactly of troubleshooting triggered this change though.

• Specs:
  

1. Windows: Windows 10 x64
   
2. Motherboard: Asus Strix B450-F Gaming
   
3. CPU: AMD Ryzen 5 3600
   
4. Memory: Corsair CMK32GX4M2E3200C16 Vengeance LPX 32 GB
   
5. Hard disks: KINGSTON SA400S37240G / WDC WD10EZEX-21WN4A0
   
6. Graphics card: MSI GeForce RTX 3060 GAMING X
   
7. Power supply: don't remember exact model but it's Corsair 550W
   

• Troubleshooting:
  

1. Changed GPU (from GTX 1060 to current)
   
2. Changed RAM
   
3. Turned D.O.C.P off
   
4. Turned D.O.C.P on
   
5. Updated all drivers (chipset, graphics, etc..)
   
6. Updated BIOS
   
7. memtestx86 (no errors)
   
8. CheckHealth
   
9. Updated windows
   
10. Installed fresh windows (wiped everything) and reinstalled all drivers.
    
11. Tried different RAM that I am sure is not faulty
    

• Notes:
  

1. I tried installing fresh windows multiple times and I noticed that every time I get insanely many BSODs before I install the chipset driver. Then it returns to normal frequency as stated in the 'problem' section.
   
2. Every time I check the performance monitor I see the message below or something similar:
   
   
   
   

 

BSOD with multiple stop codes

Problem The problem is that I get a blue screen of death (BSOD) frequently for a few months now, and it increases in frequency once I've had the first one. For example, if I leave my computer on for a while, it'll run normally for a few hours before I get my first BSOD. After I get a BSOD, I get a lot more afterward over the period of 30 mins - 1 hour. The stop codes I get are different every time so there's no way of saying which one I get the most. Problem history I don't remember exactly when I had this problem or what triggered it. But at the time I hadn't changed any hardware components or installed new software. However, I used to only get the stop code IRQL_NOT_LESS_OR_EQUAL. After some attempts of troubleshooting, I started getting all the stop codes besides IRQL_NOT_LESS_OR_EQUAL to this moment. I don't remember which step exactly of troubleshooting triggered this change though. Specs Windows: Windows 10 x64 Motherboard: Asus Strix B450-F Gaming CPU: AMD Ryzen 5 3600 Memory: Corsair CMK32GX4M2E3200C16 Vengeance LPX 32 GB Hard disks: KINGSTON SA400S37240G / WDC WD10EZEX-21WN4A0 Graphics card: MSI GeForce RTX 3060 GAMING X Power supply: don't remember exact model but it's Corsair 550W Troubleshooting replaced GPU (from GTX 1060 to current) replaced RAM Turned D.O.C.P off Turned D.O.C.P on Updated all drivers (chipset, graphics, etc..) Updated BIOS memtestx86 (no errors) sfc /scannow Updated windows Installed fresh windows (wiped everything) and reinstalled all drivers. Tried different RAM that I am sure is not faulty Notes I tried installing fresh windows multiple times and I noticed that every time I get insanely many BSODs before I install the chipset driver. Then it returns to normal frequency as stated in the 'problem' section. v2 log files: OneDrive

 

Several BSOD screens with different stop codes - Windows 10

I bought a new pc, few days ago. since I got it, my windows 10 crashed about 8 to 10 times already.
Each time I get a different stop code, the ones I got already was:

1. KMODE_EXCEPTION_NOT_HANDLED
   
2. SYSTEM_SERVICE_EXCEPTION
   
3. IRQL_NOT_LESS_OR_EQUAL
   
4. MEMORY_MANAGMENT
   
5. DPC_WATCHDOG_VIOLATION
   

All I could find is this question, but I don't know if his answer is the same as mine, please tell me if it is, I'll add pictures of anything needed.

Thank you for your help, in advance, it is really important.

EDIT: I updated all drivers (motherboard, nvidia gpu), and I got a new stop code after it crashed again: POOL_CORRUPTION_IN_FILE_AREA