Windows 10: SSD Clone using Macrium = Windows Not Loading

Hello!I have the Asus K571GT, 256GB on the SSD and 1TB on the HDD.I bought a 2TB SSD, "WD_BLACK 2TB SN770 NVMe Internal Gaming SSD Solid State Drive - Gen4 PCIe, M.2 2280", and got an SSK enclosure and used Macrium to clone my SSD C Drive with Windows to the new SSD.Ran into an Error 9.Did some checking, they said to run a CHKDSK on the C drive.Did that. RestartedRan Macrium again. Cloning was successful.Open up the Laptop, swapped out the old SSD for the new SSD.Booted back up, and the laptop is stuck on the ASUS loading screen.No rotating cursor.Just sitting there for minutes.Can't even bo

:)

 

Moving to SSD. Clone or not to clone?

I kinda agree with you, but on a wholr, do not. While I have done things a bit differently than this specific situation, by installing Windows directly to the SSD, and cloning after, my testing shows that there are no issues doing this, very little that can go wrong, provided your system is stable.

There are certain features that must be disabled in this situation, like auto defrag and such, but even with a fresh install to the SSD, you need to take steps to ensure that you SSD performs properly, regardless of how the data got there.

Arming yourself with a bit of knowledge can go a long way.

Installing the latest chipset driver, and the RST Tools, will ensure optimal performance of the SSD. but rather than taking my advice, I suggest the OP takes a look here:

http://blogs.dirteam.com/blogs/sand...7-and-ssds-to-clone-windows-or-reinstall.aspx

Install A Solid State Drive In Your Notebook

Keep in mind, also, Digibucc, that many retail drives include software and such that very specifically is to be used to ttranser the OS from an existing mechanical drive to an SSD, and if there really was alot fo issues stemming from the cloning process, they would not have packages like that, simply to eliminate tech support costs. While not the optimal option, cloning is NOT a bad thing, as long as you take the nessecary steps.

 

Moving to SSD. Clone or not to clone?

Part of how I keep my SSD fast is to clone it to a platter drive, then clone back. You just want to make sure that you are only cloning teh used space, and not the empty space.


So, again, I isntall Windows to the ssd. Clone to platter drive, then clone back.

I am not sure why, but if I do not do the clone step, the drive's speed, and windows booting, decreases substantially within a week or so.

I am using a Corsair F60 SSD and a Western Digital 500AAKS as drives, and using the free version of Acronis that WD provides, if any of that matters. I am not sure, at this point.

 

Unable to Boot to Windows 10 after Cloning old SSD to new SSD

Hi,

I'm not using the SATA ports. I'm using M.2 with the SSD, and the external SSD is connected to my PC using USB. My MB only has only one M.2 socket, so I can only plug in one SSD at a time. (I bought a wrong adapter that doesn't work with NVMe) So I cloned
my old SSD to an external SSD (Samsung M3 Portable SSD), and then swapped the old one, cloned the external SSD to my new SSD.

I tried AOMEI too, but the free version does not come with disk clone functions. I would probably try Macrium Reflect as suggested above. Thank you!