Windows 10: Getting BSOD when trying to upgrade to Windows 11

I'm using Windows 11 Installation Manager to try and upgrade to Win11. I pass all the rquirements for the upgrade. It gets through the install and when it gets to the part where it has to do a few restarts to finish the install I get blue screened, usually around 70% through. I've probably tried updating at least a dozen times after trying a ton of possible solutions.I managed to get a pic of the last BSOD icluded with log files that says "Attempted to write to readonly memory".Here's all the log files, etc. that I could put together.Win10 logsI've tried all the possible solutions I've found

:)

 

Upgrading to windows 11

I have a few questions about windows 11...

1. How many GB it is? when my pc suggested the upgrade yesterday, it said it's about 4GB just want to be sure.
   
2. I'm using a windows 10 pro so if I upgrade, will it upgrade to a windows 11 pro?
   

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

BSOD- atikmpag.sys

This is most likely due to an installation/upgrade error with ATI driver's. I suggest doing DriveSweeper and the following:

• Drivesweeper all drivers & in Safe Mode
• Unistall all drivers that aren't used in DriveSweeper (CCC Profiler Updates, MSI AfterBurner, anything related to ATI that use's it's drivers.)
• After you do this, the first thing you need to do is go into Device Manager and Unistall your ATI Drivers

Once your done, restart the PC and then try installing the latest drivers.


I had several issues with this in the past, but I overcame it with logical reasoning and whenever I have a driver issue, I just use these steps and I always overcome the problem.

Best of luck! *Toast :toast: