Windows 10: Getting multiple BSODs when starting my laptop

I have a HP Victus laptop running Windows 11. It's always had some sporadic issues, but lately it's been really bad. Almost every time I start the laptop, either from sleep or powered down, I'll get one or more BSODs. Sometimes it will eventually end me into BitLocker, sometimes into startup repair. Once there, if I tell it to just start Windows normally, it usually will, although sometimes I'll have to go through another cycle of BSODs. Laptop will also randomly get BSODs while running, usually in the first half an hour since last crash, although these ones will usually just be singletons.Sto

:)

 

HP laptop - multiple BSODs

I have an HP Pavilion 15-cs0021na, (Intel i3, 8GB, 128GB SSD) running Windows 10 Home, which exhibits the following characteristics:

• On startup, occasionally completes boot, but within 5 minutes, BSODs. with a random error, e.g. Page Fault, IRQL not equal, Memory Management and so on.
• Repeated attempts to reboot then fail with more random BSODs
• Rarely, it will attempt a Startup Repair – which will invariably fail with another BSOD.
• Wiping the hard disk and attempting to install a clean version of the OS (downloaded from Microsoft using Media Creation Tool to USB stick) will get a little way into the process, then fail with BSOD as above.

What I’ve done:

• Attempted clean install as above.
• Run multiple hardware tests on Memory and SSD - HP’s built-in tests, Memtest86, Seagate disk tools. All tests pass with no errors.
• Updated BIOS from Insyde F.04 to F.22 (HP supplied).
• Repeated clean install, same result.

I have now run out of ideas, and am at a loss to understand what is causing these errors. How are BSODs generated if no Windows installation is present? Is it likely that a hardware component other than RAM or the SSD is causing these?

Any and all suggestions will be much appreciated.

 

Multiple BSOD errors started recently


Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools and Alcohol 120%
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

Please update your BIOS to version 1402
P8Z77-V LK | Motherboards | ASUS Global


If this doesn't help, I would suggest to clean reinstall the display drivers
Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Nvidia. Be sure the clean install box is checked and only install the Graphics driver and the PhysX driver.
Attachment 67923

 

Weird BSOD problem


Hi Everyone,

I have a weird BSOD problem which I cannot solve for a while(it persists still after upgrade to Windows 10 from Windows 7)

The main strange thing about this is that I get BSOD only after cold boot.
So it acts like this:

1. start PC.
2. Get to Windows Logo Screen
3. BSOD
4. Restart
5. Get to menu where I can try to repair or Start NormallyIf I Choose Repair, it will fail to repair and will try to restoreIf I Choose Start Normally, it will start OK, no BSOD, can work normally, games, browse internet, everything is normal.6. Shutdown PC
7. Next time when I start is all over again i.e. Go to Step 1

I have this problem for a while, so what I tried:

1. Another Windows 7
2. Another HDD
3. Only HDD connected
4. Changed RAM
5. Tried with built in GPU
6. Upgraded to Windows 10

Result is the same as above every time.

Please suggest what could be the cause.
Logs collected with DM_Log_Collector, attached.


Thank you

PS. This thread is a continuation of this one: Frequent multiple errors BSOD. Solved - Windows 7 Help Forums the only thing changed is Windows 10 now. instead of Windows 7. If that helps somehow.