Windows 10: PC keeps Blue Screening, and its getting worse

PC keeps bluescreening, checking reliability monitor gave me this The computer has rebooted from a bugcheck. The bugcheck was: 0x000000c4 0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000.Links for all my most recent mini dumps:https://drive.google.com/file/d/1tL2tY4_ZUyx6OKkL63XKBHZB1QOtbJOn/view?usp=sharinghttps://drive.google.com/file/d/16WwL-Q-SL2OMVnVoYL9gxUZcP-mrZYmO/view?usp=sharinghttps://drive.google.com/file/d/1hBL1tn4fXlX84HUG32oSfhSN0h5X49yk/view?usp=sharinghttps://drive.googl

:)

 

blue screen issue


after monthes of running system it was fine then on windows 7 it blue screened after looking it over myself and getting advice from local pc shop they suggest upgrading os will fix the issue so I upgraded to win 8.1 and along followed the blue screens now again upgrading after more advice I'm on win 10 and the bluescreens followed as a bad pool error rebooting I have included the requested report please help as spending the $150 the local pc shop wants is my next step

 

my system keeps on crashing. (blue screen)

Hello Harrison,

A stop error (also called a "blue screen" error) can occur if a problem causes your PC to shut down or restart unexpectedly. These errors can be caused by both hardware and software issues.

To better assist you with your concern, I'd like to know the following:

• Confirm which build is currently installed on your device. To check, follow the steps below:

• Press Windows key + R, then type in winver.
• Click OK.

• Were there any recent changes made prior to this issue?
• What is the make and model of your device?

Meanwhile, we recommend performing the suggested steps in this article to troubleshoot blue screen issues
on Windows 10.

Looking forward to your response.

Regards.

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??