Windows 10: My pc starts up but gives no display or power towards my keyboard or mouse after latest w11...

I recently installed my new MSI tomahawk Z790 WIFI7 motherboard and for a month now everything was okay. i installed the latest w11 update and made it restart but didnt check out my pc anymore after that. The day after my pc wasnt booting up as usual anymore and now it also doesnt connect my keyboard or mouse anymore. i've tried the bios flashback for my motherboard but it doesnt work. I believe the latest update pushed some BIOS update through and now my pc doesnt properly boot up anymore. can someone give me some help?

:)

 

PC wont Start Black Screen (keyboard,mouse issue)

Ok.. after reading some of the replys, Some of this has gotten mixed up. So il Sum everything up.

Ok firstly I have Two Pc's One of which i have listed Under my name is System Specs which is Running Windows 7 and My other Pc which is Windows Xp which is the one with the problem Specs are Below.

AMD 245 2.9Ghz
4GB Team Elite 2x2Gb
Asrock N68-s Mobo
160Gb Hard Drive
550w CIT PSU

Ok For some Reason my Pc Refuses to Start up with a Keyboard and mouse in the Usb port All i get is a black Screen and so far the only way to get the pc in is if i keep Press ANy key on the keyboard and keep clicking on the mouse But this does not always work. I have tried A loads of Different Keyboards Mouses Etc... But none of which Seem to Work.

i have Tried all the Suggestions Given to me wont list them as there are loads now...Lol
However one of the Suggestions Did kinda work which was to Connect my Keyboard mouse Using a Ps/2 adapter which Seems to be working ok But not fully sometimes it dont want to start up again say 2/10.

Yesterday i Went to a Friend of mine who is Pc Engineer and we connected it up Using His Psu and His microsoft keyboard and Mouse which worked Fine the problem was gone. Please note we done a bench Test Leaving only His Hard drive Connected to the board, He is also running windows Xp Pro ... Thought it Be best to Use Same OS.

But as soon as i Took it Home and tried it again thinking it was ok... I was wrong.

@Scaminatrix : Board was Bought Brand New was in my Windows 7 Rig for a week then i decided to Upgrade My Cpu and Mobo. So I stuck my Old Board and Cpu in this pc (One with the problem)

@Aleksander : Yh Saw the post about this Board. No Doesent have CPU Unlock, USb is enabled in Bios. Erm I have Tried loads of Different Keyboards and Mouses, Trust ,Microsoft, Sumvision about 6 different keyboards mouses i own and about 4 i borrowed from some Friends and the only one that worked was the engineers Microsoft Keyboard and mouse.

@jakeman97 : The Pc In My Specs is My Main Rig (One Running W7) and the one with the problem is my Second Rig which is Running windows Xp and is only really Used for Video Editing and the Ocational Game with a m8t ...Lol

Finger hurt now from typing...LOl

 

Pc starting but no power/signal to keyboard, mouse or monitor

Hi,

So I've had my gaming pc for a while now.

It runs fine but recently did a factory reset and followed this guide afterwards;ttps://www.youtube.com/watch?v=pJTCwSX9Ym8&list=WL&index=5&t=0s it was fine and so I left it on just downloading a game a few days later, nothing unusual. I came back to it
on but no signal on monitor and no power to keyboard and mouse. I've tried going back to a restore point before following the youtube video and still not working so I don't think that's the problem.

Operating System - Windows 10

Device - Zoostorm Computer

Specs -

ProcessorIntel(R) Core(TM) i7-4790 CPU @ 3.60GHz

Video CardNVIDIA GeForce GTX 750 Ti

Video Card #2NVIDIA GeForce GTX 970

RAM16 GB

Operating SystemWindows 10

But it had been working fine, the only thing I could think of is if I had a pre-existing virus or something that was causing this but surely that would've done this sooner. Anyway, right now when I turn my pc off it does the above again, power to the pc
but no keyboard or mouse power and no signal to keyboard. I have figured out that if I take one stick of RAM out (I have two 8gb RAM) and start it up on just one it all boots up and powers everything fine. I then it off, insert the other stick of RAM and start
it up again and it works. But then I power it off at the end of the day and have to repeat those steps again the next morning. This has been happening for a week-ish now and it's just getting time consuming and annoying to do everyday.

Any help or advice would be appreciated.

Thanks, Lewis.

 

Mouse and Keyboard not recognised on boot until i unplug mouse

As the title says after resetting not shutting down PC from start menu my PC wont recognise my mouse or keyboard but when i unplug my mouse it recognises the keyboard and when i plug my mouse back in it recognises it agian... Windows 20H2 latest updates...

- - - Updated - - -

On a friends suggestion it seems i was able to fix the problem but cleaning out the CMOS. Dunno how this helped but at least Windows is recognising it fine on bootup again...