Windows 10: how do i connect to router via cable?

how do I connect my laptop to my wireless router via a cable?

:)

 

Wireless cable modem/router/firewall

can someone recommend me a wireless router with built in cable modem. Most of the devices ive seen are equiped with ADSL modems!

required features

• Wireless

• firewall

• router

• Built in cable modem

• fully telewest/blueyonder compatible

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Router Setup Question

Firstly, are you trying to connect to the router via a wireless adapter or are you directly hooked into the router? Some routers dont allow you to configure them remotely (using wireless, or configuring it from a computer not directly connected to it with cable).

Did you follow all the instructions step by step, correctly? Routers are very picky and sometimes need to be reset if you disconnect/connect modems, power and other connections from them in different orders.

If the above dont work, Reset the router by removing the power cable and waiting a few seconds and try again.