Windows 10: BSOD Help

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0xffff878ff45aed21, 0x0000000000000002, 0x0000000000000001, 0xfffff80001ccc406). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: b423dfbb-065f-452b-9d94-b7a10abbdb59.

That Is From Event Viewer


On Mon 11/12/2018 4:57:23 PM your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\111218-10015-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x1B1040)
Bugcheck code: 0xA (0xFFFF878FF45AED21, 0x2, 0x1, 0xFFFFF80001CCC406)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above. This is a software bug.
This bug check belongs to the crash dump test that you have performed with WhoCrashed or other software. It means that a crash dump file was properly written out.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

That Is From WHOCRASHED


I consider myself fairly tech savvy but this is out of my wheelhouse so please help me Diagnose this issue I'll try to give all info i know may be relevant.

New install of Windows After hardware change motherboard and cpu with aio cooler, checked drivers in device manager(not the greatest at this but i right clicked -update driver from online), scf/scan no errors, checked disk........Help me on how to track this down and fix this issue Please

:)

 

help to remote connect

not sure how to use both programs u 2 suggested, i need more helpful steps thanks

 

BSOD Help!

Disable hardware accel in your browsers. Also aumha.org for bsods listing. Turn on power saving for your gcs(set to oc in games but not webbrowsing)

 

BAD_POOL_HEADER BSOD, Dump File attached


Hi Groggubus,

Welcome to the 10forums

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

Please follow this suggestion for the BSOD

1. Please open BitDefender and go to the modules,
2. Go to the firewall settings,
3. Uncheck 'Block port scans in the network',
4. Reboot your system <-- IMPORTANT