Windows 10: G:\...

I have been using the Cruzer Gliide for File History. Today it stopped working & I cannot turn file History back on & my flash drive is showing the subject above. I don't know how to fix this.

:)

 

Things to do once connected new G-Sync monitor

I'm getting my G-Sync monitor today.

I think I have to take the following steps:

• Connect 1440p G-sync monitor with DP cable
• Connect second 1080p 60Hz monitor by HDMI
• Startup PC
• Reinstall display driver
• Restart PC (I always do that after display driver install)
• Activate G-Sync in NV control panel (I believe also V-Sync is auto on after that?)
• Set my 1440p monitor from 1080p to 1440p
• Calibrate my 1440p monitor

Also ingame, I should turn off V-Sync?
Are there any problems running a second 60Hz 1080p monitor?

Is there anything else I should do/know?

 

Office And Light Gaming Build

There's nothing wrong with the build, but I have some suggestions to, IMHO, make it better:

• You list a 550 watt PSU, but you have a 51 watt CPU and a GPU that pulls 120 watts at the max. In other words, your system will pull under 200 watts at maximum load, which it sounds like will be rarely. PSU's are most efficient between 50-80%, and even at max load, this system won't reach 50%. Suggest a PSU 400 watts or less, like the Seasonic G-360.
• RAM's really cheap. Suggest getting 16 GB instead.

 

Problem with a 64gb USB Verbatim flash stick


Cleaned the WinToUsb drive (G) with DiskPart as suggested and now it just says USB Drive (G).
I cannot seem to be able to format it with either NTFS or FAT(Default) ?

I think what you said about creating a partition is probably what I didn't completely understand....and may have bypassed that step ?

I think I need you to guide me through that step.