Windows 10: 0x0000034 error code on MSI Meg X570s Ace max windows 11

I'm currently following this guide You can try this procedure to repair the boot.1-Restart your computer while holding the SHIFT button2-The Advanced Startup menu will open on the boot.3-Go to Troubleshoot.4-Now, go to Advanced Options >Command prompt5-Run these commands:chkdsk c: /f /r and press Entersfc /scannow and press Enterdiskpart and press Entersel disk 0 and press Enterlist vol and press Enter6-Verify that the EFI partition EPS is using the FAT32 file system and assign a drive letter to it that is not already in use:sel vol <number of volume> and press Enterassi

:)

 

0x0000034 error code on MSI Meg X570s Ace max windows 11

I'm currently following this guide You can try this procedure to repair the boot.
1-Restart your computer while holding the SHIFT button
2-The Advanced Startup menu will open on the boot.
3-Go to Troubleshoot.
4-Now, go to Advanced Options >Command prompt
5-Run these commands:
chkdsk c: /f /r (and press Enter)
sfc /scannow (and press Enter)
diskpart (and press Enter)
sel disk 0 (and press Enter)
list vol (and press Enter)

6-Verify that the EFI partition (EPS) is using the FAT32 file system and assign a drive letter to it that is not already in use:
sel vol <number of volume> (and press Enter)
assign letter=Z: (and press Enter)
exit (and press Enter)

7-In order to repair the boot record:
cd /d Z:\EFI\Microsoft\Boot\ (and press Enter)
bootrec /FixBoot (and press Enter)
bootrec /rebuildbcd (and press Enter)
ren BCD BCD.old (and press Enter)
bcdboot c:\Windows /l en-us /s <boot letter>: All (and press Enter)
(Note: The <boot letter> is replaced with the letter of the drive that you are booting from. (For example, C:\, D:\)

8-When finished close the command prompt then click to return to the first screen
9-Click to continue to normal boot

But I'm stuck on part 5 and 6 because I have no idea of which partition I have to select in order for me to repair the efi boot partition in order for me to boot back into windows. I accidentally over clocked my ram outside of spec by using different timings that's not supported by my ram and it corrupted a few system files but I already did disk check and such. Since I'm stuck I don't know how to boot into Windows from here. In my situation im having a really hard time in trying to boot into windows if anybody can help me i would really appreciate it.

 

ARM-based PC (Windows 11) keeps running into ERROR CODE 0x0000034.

Hello, my Samsung Book GO (LTE) suddenly ran into the ERROR CODE 0x0000034 when it was updating. I already created a Windows 11 Installation Media USB tool and also prioritized it in boot. The usual installation screen is not showing up, and instead it's going directly to the log in screen. I am able to use the computer, but not without the USB tool. Without it, the same error (0x0000034) occurs.

It's running with the specs listed below. I am unsure of the methods because it is an ARM-based PC.

Processor / Chipset

• Snapdragon 7c Gen 2 (Kryo™ 468 Octa-core CPU, up to 2.55 GHz)
  

Memory

• 4 GB LPDDR4x Memory (On BD 4 GB)
  

Storage

• 128 GB eUFS
  

I would appreciate any advice. Thank you so much.

 

MEG x570 ACE MOBO with Ryzen 9 CPU Windows 10 Install Problems

Hi all,

After a few days of chugging at this problem, trying bios tweaks and following guides, I still cannot seem to install windows on this machine.

Using both the MCT from windows itself and Rufus with a ISO image of windows 10 nets a windows blue screen error 0xc000000f.

This is just testing the board with the m.2 ssd inside of it / RAM / cpu etc / boot flashdrive / keyboard. No other USB input is being used.

System time was correct in BIOS

Tried using known working RAM no change

Tried using known working SSD no change

Still getting error 0xc000000f

A required device isn't connected or can't be accessed

Any and all help would be greatly appreciated!

System Specs:

MOBO: MEG x570 ACE

CPU: Ryzen 9 3rd Gen

SSD: Corsair MP 600