Windows 10: 0x0000034 error code on MSI Meg X570s Ace max windows 11

I'm currently following this guide You can try this procedure to repair the boot.1-Restart your computer while holding the SHIFT button2-The Advanced Startup menu will open on the boot.3-Go to Troubleshoot.4-Now, go to Advanced Options >Command prompt5-Run these commands:chkdsk c: /f /r and press Entersfc /scannow and press Enterdiskpart and press Entersel disk 0 and press Enterlist vol and press Enter6-Verify that the EFI partition EPS is using the FAT32 file system and assign a drive letter to it that is not already in use:sel vol <number of volume> and press Enterassi

:)

 

ARM-based PC (Windows 11) keeps running into ERROR CODE 0x0000034.

Hello, my Samsung Book GO (LTE) suddenly ran into the ERROR CODE 0x0000034 when it was updating. I already created a Windows 11 Installation Media USB tool and also prioritized it in boot. The usual installation screen is not showing up, and instead it's going directly to the log in screen. I am able to use the computer, but not without the USB tool. Without it, the same error (0x0000034) occurs.

It's running with the specs listed below. I am unsure of the methods because it is an ARM-based PC.

Processor / Chipset

• Snapdragon 7c Gen 2 (Kryo™ 468 Octa-core CPU, up to 2.55 GHz)
  

Memory

• 4 GB LPDDR4x Memory (On BD 4 GB)
  

Storage

• 128 GB eUFS
  

I would appreciate any advice. Thank you so much.

 

MEG x570 ACE MOBO with Ryzen 9 CPU Windows 10 Install Problems

Hi all,

After a few days of chugging at this problem, trying bios tweaks and following guides, I still cannot seem to install windows on this machine.

Using both the MCT from windows itself and Rufus with a ISO image of windows 10 nets a windows blue screen error 0xc000000f.

This is just testing the board with the m.2 ssd inside of it / RAM / cpu etc / boot flashdrive / keyboard. No other USB input is being used.

System time was correct in BIOS

Tried using known working RAM no change

Tried using known working SSD no change

Still getting error 0xc000000f

A required device isn't connected or can't be accessed

Any and all help would be greatly appreciated!

System Specs:

MOBO: MEG x570 ACE

CPU: Ryzen 9 3rd Gen

SSD: Corsair MP 600

 

Windows 11 MSI MEG x570 AMD Freezing with DPC_WATCHDOG_VIOLATION

Hi, thank you for the detailed information, upon analyzing and checking the DMP files, the error you have is ntkrnlmp.exe, this is usually caused by Damaged power cords and adapters, and drivers, to fix this issue kindly refer to the steps provided on this link:

https://www.lifewire.com/fix-the-ntkrnlmp-exe-e...

Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

Additional note: If the issue persists, I suggest contacting a local technician to physically check the device for any hardware-related issues.