Windows 10: 1 gb writing on ssd every time i boot up , is it normal?

whenever i boot up my device , it writes on ssd about 1gb data every time , only system writes this , i normally use my laptop with no downloading and when i check through hwinfo sensors it shows approx.700-800mb is written , is it okay or there is something problem

:)

 

Unable to boot Windows after cloning it to SSD

Hi,



Thank you for writing to Microsoft Community Forums.



I understand that you are facing issues while booting the PC after cloning Windows to new SSD. I would like to know what happens when you try to boot the PC to desktop using SSD?



The reason you are not able to boot the PC is that the files required to boot Windows are still recognizing the HDD as the main drive. I would suggest you to try rebuilding the BCD files and see if you are able to boot the PC using
SSD.



Kindly follow the steps below to rebuild the BCD.

1. Create a bootable media and boot the PC using the media.
2. On the Install Windows screen, select Next >
   Repair your computer.
3. On the System Recovery Options screen, select
   Troubleshoot> Advanced options > Command Prompt.
4. Now type in the commands and hit enter: BOOTREC /FIXMBR
   
   BOOTREC /FIXBOOT
   
   BOOTREC /scanos
   
   BOOTREC /rebuildbcd
5. Restart the PC.

If the issue persists, please get back to us with the results of the troubleshooting steps to assist you further.



Regards,

Prakhar Khare

Microsoft Community – Moderator

 

Is this amount of Data writen normal for a SSD?

I don't use SSD, since I heard that SSD has a very limited time for writes. And every time, you write something, it erases whole piece and write again together with the new to storage. Tip also suggests us to leave 1/4 SSD space for temporary storage. Or trouble will come.
Tips also recommend us to leave SSD for OS, and HDD for programs and data.
If your data is OS data, then there is nothing to do.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.