Windows 10: 1 TB Hard Drive connected to USB cable form my PC USB

Hi


please advise what can I do

I have a 1-TB Hard Drive that I use for external use and carry it around me

I connected it to my PC USB I can see it but it does on my PC

:)

 

External Hard Drive not seen when connecting by eSata to USB 3 cable

Hi Chillbast2017.

Try this:

Connect your External Hard Drive eSata to USB3 to new pc.
Open Computer Management, then Disk Management and at the bottom search for your 1 TB external hard drive, if you can see it there, right click mouse on it, then click on Change Drive Letter and Paths, click on Add, choose Assign the Following Drive Letter, choose the letter on your right and click ok. Close Computer Management. See if it worked. I had the same problem with an old HD on Windows 10 x64, windows didn't recognize the hard drive connected with eSata cable to USB 2 or 3, and this did the trick.

Cheers

 

External Hard Drive not seen when connecting by eSata to USB 3 cable


I have a 1TB external hard drive (Medion HDDrive 2 GO) from 2010 that came with a Medion PC from Aldi which my family still use. It is equiped with an eSata connection and a USB2 connection. Both these work fine on the old Medion PC running Windows 10 Home 32bit. The eSata connection is much faster speed and I have a eSata to USB3 adaptor cable which works fine on the Medion PC.
I want to use this external drive of a newer PC that only has USB 2 and 3 connections. It works fine plugged into both USB2 and USB3 with the standard USB to USB cable.
But plugging the eSata to USB3 cable in nothing happens.
I have tried to see if I can get a driver from Medion but the unit is not listed on their web site.
Also have tried to see if I can get a driver on the internet and did install one that looked hopeful but did not help.
Attached are images of the showing the drivers in use on the Medion PC (Windows 10 Home 32 bit) when connected by USB to USB cable and eSata to USB cable.
Also attached is image of driver in use on newer PC (Windows 10 Pro 64 bit) when connected by USB to USB cable.

Older Medion PC says when connected with eSata to USB cable that External Hard Drive is a ASMT 2115 USB device - disk drive (driver Microsoft 10.0.14393.0 21/06/2006)
and when connected by USB to USB cable as Hitachi HDS721010CLA332 USB drive (driver Microsoft 10.0.14393.0 21/06/2006).

On newer PC (Win 10 Pro 64 bit) when connected by USB to USB cable it says Hitachi HDS721010CLA332 USB drive (driver Microsoft 10.0.14393.1613 21/06/2006).

Any suggestions on how to get the eSata to USB3 cable connection for this externasl hard drive to work on Windows 10 Pro 64 bit PC?
Would it be possible to copy some how driver from older PC to new PC?

Many thanks for any advice.

 

Bipra external USB Hard Drive no longer connects


My BIPRA external USB Hard Drive has stopped connecting. I use it to provide ample extra storage for my 2-in-1 tablet PC, mainly for backup purposes, which it did very well until recently. Now it either does not connect at all, or if it does it is not good enough to enable reading and writing, or for the Drive to be listed in MY PC.

The Drive has two cables, one is USB to USB for data, the other is USB to phono for additional power input. In the past it did work OK with just the data cable, but now it does not work even with both cables in use. I know there is 'basic' connection because the LED lights up (and there is the normal USB connecting / disconnecting pinging sound.) When first trying to connect, Windows frequently notifies that an unrecognised or faulty USB devices is detected. During brief periods of it working I have been able to check the Drive for disk errors, with zero results.

I have now tried every configuration possible, using different ports, with or without hubs.I have used an air duster to clean the connections..

What else can I try?