Windows 10: 2 networks showing on a single adapter

I am getting 2 networks showing up on a single Ethernet interface with different security levels, this is causing problems as I want the port to be on a private network, but the Public security is being applied instead.Network 3 and Network 6 are on the same Ethernet port, the output of Get-NetConnectionProfile is giving me only Network 3, however I am not able to ping the device on the other end properly as I could when there was only the 1 network. I am not sure how I can change or remove this network since I cannot see it anywhere to change its security level.

:)

 

network adapters

Hi, Michael.



Thank you for posting your query in Microsoft Community.

As per my understanding, you may be facing an issue with your driver updates.

I suggest that you perform the steps mentioned below and check if it helps you resolve your issue.



Method 1: Network troubleshooting

• • • On the search bar type “Troubleshooting”
    • Click on “Network and Internet”
    • Click on “Network Adapter” and run the troubleshooter.

Method 2: Download and install the latest firmware updates for the Network adapter

Follow these steps to un-install the drivers:

• On the search bar type “ Device Manager”
• On the left pane locate “Network Adapter” and expand by clicking on it
• Right on the “ Network driver” option and click “Uninstall’
• Download the latest Wireless network adapter driver setup file from the manufacturer’s website and install it.

Your reply is very important for us to ensure a proper resolution. Please get back to us with the above information in order to assist you accordingly.

For further assistance, you can post your query in Microsoft Community

 

Dedicating a single adapter to a single network when using multiple WiFi adapters

Hello Billysauto,

I understand that you want to dedicate a single adapter to a single network when using multiple Wi-Fi adapters. I appreciate your efforts that you have taken in providing the information.

I suggest you refer to the article for more information on

How multiple adapters on the same network are expected to behave

However, let me point you in the right direction where you can get the appropriate assistance regarding this issue. I suggest you to post your query in

Microsoft Technet forums where we have expertise and support professionals.

Regards,

Zaki

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs