Windows 10: 2004 Update, Problem with Intel driver update installation

I have installed the 2004 update and now get the following message 'A current driver on your PC may be better than the driver we're trying to install. We'll keep trying to install.'

The Intel driver, version 26.20.100.7325 it is trying to install was already loaded with the 2004 update so why does update keep trying to load it again?

how do Microsoft intend to resolve this situation?


Thanks.

:)

 

Intel Readies P55 Chipset B3 Stepping Update

Intel's is readying a hardware update for its P55 Express chipset, currently the only core-logic for the company's brand new socket LGA-1156 processor platform. The new B3 stepping of the P55 PCH will bring with it a little more than new MM number and S-spec numbers. A list of changes is as follows:

• New MM number and S-spec numbers for the converted products;
• Firmware and minor BIOS updates are required with the conversion;
• Processor MRC/microcode update required to enable future processors;
• Recommended storage driver upgrade from Intel MSM 8.9 to Intel RST 9.5.

Although it is listed that the MRC update enables 'future processors', Intel, in a statement issued to X-bit labs assured that the current B2 stepping of the chipset (found on current socket LGA-1156 motherboards) does not leave out support for any of Intel's new LGA-1156 processors that are slated for release in the very near future. The dual-core "Clarkale" 32 nm processor will be supported by both B2 and B3 steppings of the chipset.

P55 B3 stepping is pin-identical to P55 B2, and hence motherboard vendors will not have to come up with new designs. Sampling of the new stepping began as early as on October 02, 2009, and it is scheduled for shipment to manufacturers by the 7th of December, 2009. P55 is the performance core-logic for the LGA-1156 platform. It supports Core i5 and Core i7 "Lynnfield" processors with discrete graphics.

Source: X-bit labs

 

ATI Driver install problems

Hi!

There seems to be a kind of a mess after deletion of your current driver.
Have you tried step-by-step drivers update procedure including Driver Sweeper, deleting Prefetch and Temp folders, etc?

 

ATI Driver install problems

It's all laid out here: How To: Reinstall Video Drivers (Quick Guide)

It could be a problem with the monitors OSD chip.