Windows 10: 2133Mhz RAM together with an i5-2500k

Does anyone know for sure wether my rig will support 2133Mhz RAM?
According to mainboard/cpu documentation the mainboard supports it, but the processor doesn't.
My current RAM runs at 1600Mhz though and it seems to work.

More info about my current setup: https://i.imgur.com/lQE2CX5.jpg

According to ark.intel.com not even 1600Mhz memory should work... *sarc

:)

 

0x8007002C - 0x4000D Error at 84% upgrading

I am getting this error at 84%

The installation failed in the SECOND_BOOT phase with an error during the MIGRATE_DATA operation

Specs: Intel i5 2500k (64-bit)

8GB RAM

~ 30GB Free on C:

GTX 660

 

100% cpu usage windows 10

Same here with i5 2500k @3.3GHz

 

I don't know.

The QVL (qualified vendors list) for the board lists RAM up to 2400 MHz, but run at 1333. Support for high frequency RAM, but only after a fashion.

I guess that anything over that would be overclocking. All that I can suggest is trying it (may require manually setting the memory frequency in the BIOS) and running a memory test to see whether it is stable.

 

In keeping things simple, there's a standard that the industry follows where RAM speed is concerned and anything above that is considered overclocking. In the old days of the first i5/6/7 processors the spec was 1600. Today, it's 2133.

That said, it's really up to the motherboard manufacture as to whether the RAM is capable of running at higher speeds so that's where you'd need to look. Not Intel. Again, this is the simplified version.

Bottom line is you need to consult the MB vendor for RAM support.

 

Thanks for the info! Can you go into more details though? Does this mean it doesn't really matter what intel says on their website about maximum memory frequency? I work in IT but don't do much hardware stuff so this interests me *Biggrin

Thanks for the hint about QV Lists! My board is on there!



I have just bitten the bullet and bought the RAM, i'll report back with more info when i'm done trying it out!

 

The easiest way to explain this is to simply say Intel lets you overclock your RAM using what's known as an XMP Profile. The XMP profile is built into the RAM, and the motherboard manufactures says what profiles can be used. I.E. some profiles may be too high for certain boards - Example, certain MB/CPU's won't allow for 4000MHz RAM modules, while others might.

You can read about it here - Intel® Extreme Memory Profile (Intel® XMP) and Overclock RAM

Also see my post here.