Windows 10: 4 instances of the same drive.

This is a curious one

I used a 64 GB USB stick to install an iso file on another computer also used a 1GB for the same purpose, then formatted it in windows 10 now it is showing 4 instances of the same drive. If I eject any one of the drives they all go away even if it is still plugged in. File explorer has shown more than one instance of a drive before so I'm not surprised. It is configured as fat and will not allow me to change anything other than the drive name. Is there a way to correct this?

:)

 

Hard drive/ OS issue

a guy suggested :

• shutdown
• unhooked HDD
• restarted
• yay !!
• reconnected HDD
• restarted
• yay !!

also , try method 3
How do I unlock the drive where Windows 10 is installed?

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

Optical Drive Issue

Hi Jerry, you're welcome.

Here's mine after I rt clk'd on my Documents Folder like you show in Scrsht 11:




I'd like to wait until you reply to my question in Scrsht 12, if it is a remnant of the process try deleting the one on the dsktp and see if the one in send to also disappears. If it stays in send to, test it, and if you're still having problems I'd suggest you could go back to: Option One: To Add or Remove Items in Send To context menu for Your Account (current user) and do Step 3 to remove it and start over using Step 4 but be very careful of your steps in creating the shortcut and be sure you d&d that shortcut to the send to part of the address.

I'm busy today and I probably won't be back until the evening.