Windows 10: 4 sections in computer management, 5 sections in diskpart list partition.Why?

I have 1 ssd drive.disc 0. The Windows 10 operating system is installed. There are 4 departments in computer management. While disk 1 is selected at the diskpart command prompt, there are 5 partitions with the list partition command. Not in computer management. However, when I run the diskpart>select disk 0>list partition command, the size of the disk seen is:16 mb The dimensions of the other sections are compatible. Why is this so?

:)

 

W7 Hard drive partition issue

to get rid of that 100 meg windows partition that setup creates for you on a new install on a blank hdd:

- press shift+f10 when on the partition management screen in setup <-- this opens a command prompt
- diskpart <-- start the windows command line partition management tool
- list disk <--- list the installed hdds in this computer for the next step
- select disk 0 <- might have to replace 0 with the number of the correct disk
- clean <-- this will erase all data on the disk you selected one step up- dont use the wrong disk!
- create partition primary <- creates a primary partition taking up all space on the drive, adjust the command if necessary
- exit, exit to exit diskpart and the command prompt
- click refresh in partition manager and select your newly created partition and install to that

 

Diskpart: Partition exists, but missing in 'list vol'

Trying to assign a letter drive to a partition to fix WinRE on my ASUS laptop.

Partition 4 is my RECOVERY partition.

• In EaseUS Partition Master, it is correctly called RECOVERY.
  
• In Windows Disk Management, it has no name.
  
• In diskpart, it is called OEM.
  

I cannot assign a drive letter to partition 4. Partition 4 does not show up under list vol.

DISKPART> list part

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 System 260 MB 1024 KB
Partition 2 Reserved 16 MB 261 MB
Partition 3 Primary 453 GB 277 MB
Partition 4 OEM 1100 MB 453 GB
Partition 5 Primary 22 GB 454 GB
Partition 6 Recovery 200 MB 476 GB

DISKPART> sel part 4

Partition 4 is now the selected partition.

DISKPART> assign letter=x

There is no volume specified.
Please select a volume and try again.

DISKPART> list vol

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 D Crucial P5 NTFS Partition 1863 GB Healthy
Volume 1 C OS NTFS Partition 453 GB Healthy Boot
Volume 2 RESTORE NTFS Partition 22 GB Healthy
Volume 3 SYSTEM FAT32 Partition 260 MB Healthy System
Volume 4 MYASUS FAT32 Partition 200 MB Healthy Hidden

Trying to follow this guide:

https://github.com/mjishnu/Fix-MyAsus-In-WinRE

 

Diskpart: Partition exists, but missing in 'list vol'

Hi there,

I don't know why the error "There is no volume specified. Please select a volume and try again" appears, but you can change the partition ID to basic data partition and assign a drive letter via Disk Management.

Run:

• diskpart
  
• sel disk # -- replace # with the actual disk number.
  
• sel part 4
  
• detail part
  
• set id=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
  
• gpt attributes=0x0000000000000000
  
• exit
  

(Post screenshot.)

See if you can assign the drive letter using Disk Management.

Note: After fixing WinRE, change the ID and attributes using these commands:

• diskpart
  
• sel disk # -- replace # with the actual disk number.
  
• sel part 4
  
• set id=de94bba4-06d1-4d40-a16a-bfd50179d6ac
  
• gpt attributes=0X8000000000000001
  
• exit