Windows 10: 5.1 speaker problems with Windows 11.

I am having an issue getting my 5.1 surround sound system to work properly in windows 11. I just noticed it is not working when doing some cable management on my pc.My MOBO: ASUS ROG Crosshair VIII HERO WIFI - https://rog.asus.com/uk/motherboards/rog-crosshair/rog-crosshair-viii-hero-wi-fi-model/My Speakers: Logitech z906 - https://www.logitech.com/en-gb/products/speakers/z906-surround-sound-system.980-000469.html?utm_campaign=dr&utm_source=google&utm_medium=pla&irclickid=0aCUrGxMMxyIWYp3lNWB21ozUkG1YF091zh12E0&irgwc=1#specs.All my speakers work, when I put music on, music come

:)

 

Windows 10 1709 System Restore problems...

That seems to be an attempt at Option 2 in the tutorial, which requires you to
a. Boot to a command prompt (Did you?)
b. You then seem to be mixing steps 3,4 and 5, thus your command is incorrect.

I suggest Option 1 is easier.

If you still have problems, please repost listing each specific step and saying which option from the tutorial you are using. Thanks.

 

Speakers suddenly having problems

Hi Alex,

As you are facing issues with accessing the speakers on your device. Do not worry we will help you with this issue.

Do let us know the following to assist you better with this issue:

• What is the make and model of your device?
• Have you made any changes to the operating system that might have resulted in this issue?
• Are you referring to the external speakers/ laptop speakers?
• If you are referring to external speakers, were you able to detect the device?

Let us try the below troubleshooting steps and check if it helps.

Step 1: I suggest you to run Hardware and Devices troubleshooter.

Hardware and Devices troubleshooter
checks for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• Press Windows key from the keyboard, type
  Troubleshooting and select it.
• Click on view all option on the upper left corner of
  Troubleshooting window.
• Select the Hardware and Device
  options from the list.
• Click Next to run the
  Hardware and Device Troubleshooter.

Step 2: I recommend you to install all the pending updates on your device and check if it helps.

Steps:

• Connect to the internet.
• Press Windows key and type updates.
• Click on Check for updates.
• Under Windows Updates, click on Check for updates.
• Try to install the updates being shown.

Hope it helps. Try the above and update us the status of this issue with the required information, we will be happy to help you further.

Thank you.

 

Nvidia driver problem with 940 MX on Windows 10 x64

I would only go back to the driver from the computers manufacturers if you experience any issues with the latest drivers from devie manufacturers.

If everything is still working well with the clean boot then you can start troubleshooting as follows to start:

How to determine what is causing the problem after you do a clean boot


1. Log on to the computer by using an account that has administrator rights.
2. From Start, search for msconfig. (In Windows 10, use the Search box from the Start menu. In Windows 8 or 8.1, swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search.)
3. Select msconfig or System Configuration from the search results.
4. Tap or click the Services tab, and then tap or click to select the Hide all Microsoft services check box.
5. Tap or click to select the upper half of the check boxes in the Service list.
6. Tap or click OK, and then tap or click Restart.
7. After the computer finishes restarting, determine whether the problem still occurs.
• If the problem still occurs, repeat steps 1 through 6, but clear the lower half of the check boxes in the Service list that you originally selected.
• If the problem does not occur, repeat steps 1 through 6, and select only the upper half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem when only one service is selected in the Service list, this means that the selected service causes the problem, and you should go to step 11. If no service causes the problem, go to step 8.
8. Repeat steps 1 and 3 in this section.
9. Tap or click the Startup tab, and then tap or click to select the upper half of the check boxes in the Startup Item list.
10. Click OK, and then click Restart.
• If the problem still occurs, repeat steps 8 and 9, but clear the lower half of the checked boxes in the Startup Item list that you originally selected.
• If the problem does not occur, repeat steps 8 and 9, and select only the upper half of the remaining check boxes that are cleared in the Startup Item list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem after only one Startup Item is selected in the Startup Item list, this means that the selected Startup Item causes the problem, and you should go to step 11. If no Startup Item causes this problem, a Microsoft service probably causes the problem. To determine which Microsoft service may be causing the problem, repeat steps 1 through 7 without selecting the Hide all Microsoft services check box in each step.
11. After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved. Or, run the System Configuration utility, and then tap or click to clear the check box for the problem item.
From <https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows>