Windows 10: A driver cannot load on brand new computer. Driver: rikvm_F73955D2.sys - what is that...

Computer updated. Laptop only two months old. Windows 11. Now get message from program compatibility assistant that Driver: rikvm_f73955D2.sys cannot load due to a security setting. I do not want to turn off any security, so what is this driver for and what an i supposed to do about it?

:)

 

A driver cannot load on this device. Driver:IVrs64.sys

Hi there,

I've recently purchased a new pc and now I'm installing the driver I need to work with my wacom cintiq. It was not working so I contacted Wacom support and they asked if there were any updates to be done. These are the ones I installed:

- Logitech - Media 10/22/2012 12:00:00 am - 13.80.835.0

- Intel Corporation - Display - 31.0.101.5187

Unfortunatelly, now I'm getting this image as I restarted my pc:

"Driver: IVrs64.sys

IVrs64.sys

A security is preventing this driver from loading. You'll need to adjust your settings to laod this driver"

I tried these to make it work:

1. Run as Administrator: Try running the program or installer that is attempting to load the driver as an administrator. Right-click on the program and select "Run as administrator" to see if this allows the driver to load.
   
2. Disable Driver Signature Enforcement: Sometimes, Windows blocks the installation of unsigned drivers by default. You can temporarily disable driver signature enforcement to allow the installation of the driver. Here's how to do it:
   
   • Restart your computer and enter Advanced Startup Options. You can do this by holding down the Shift key while selecting Restart from the Start menu.
     
   • In the Advanced Startup Options menu, choose Troubleshoot > Advanced Options > Startup Settings > Restart.
     
   • After your computer restarts, you will see a list of startup settings. Press the F7 key to select "Disable driver signature enforcement." This will temporarily disable the enforcement of driver signatures.
     
   • Once Windows restarts, try to load the driver again.
     
3. Check Group Policy Settings: Group Policy settings can sometimes prevent the loading of certain drivers. You can check the Group Policy Editor to see if any settings are blocking the driver. Here's how:
   
   • Press Win + R to open the Run dialog, type "gpedit.msc," and press Enter.
     
   • Navigate to Computer Configuration > Administrative Templates > System > Driver Installation.
     
   • Look for any settings related to driver installation or driver signing, and make sure they are set to "Not configured" or "Disabled."
     
   • Restart your computer and try to load the driver again.
     
4. Update or Reinstall the Driver: If the driver is outdated or corrupted, updating or reinstalling it may resolve the issue. Visit the manufacturer's website to download the latest version of the driver, or use Device Manager to update or reinstall the driver.
   

I'm trying to disable my antiviry temporarely now.

Could someone help me with this?

Thank you

 

Unlocked Realtek HD Audio Drivers Windows 7 & 8 (With Dolby Digital Live and DTS Interactive)

Its working fine with windows 8.1 64bit . Dont need enable driver enforce when you restart computer.

Step 1 : Copy file RTKVHD64.sys ( Driver mod ) to folder Vista64 in orginal driver .
Step 2 : Enable Driver Signature Enforcement
Step 3 : Setup Driver from step 1 , Dont Restart .
Step 4 : Turn on DTS 5.1 format .
Step 5 ; Disable Driver Realtek in Driver manager
Step 6 : Copy file RTKVHD64.sys ( original Driver ) in Vista 64 (Original Driver ) to C:\system 32\Drivers
Step 7 : Restart computer then enable driver realtek in Driver manager .
DTS 5.1 disappear in format sounds but it still working . You dont need change format sound.

 

Steelseries Merc Keyboard driver alpham164.sys disabled after windows 10 creator update why? how to undo/force it?

well I'll do the best I can to go step by step:

• Boot With Driver Signing disabled
• With Zengine installed, go to your "Saved Bettam folder"\Kernel2k\Bettam12.inf.
• Right click and select install.
• Go to your %SystemRoot%\System32\DriverStore\FileRepository\ and make sure the Bettam12_* folder is created... *being the alphanumeric hash that is generated when you install a driver.
• If this folder is created then go to regedit
• Go to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\PnpLockdownFiles\%SystemRoot%/System32/drivers/Alpham164.sys
  • Edit the Source entry to your %SystemRoot%\System32\DriverStore\FileRepository\ bettam12_*\Bettam164.sys
• Look for Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\PnpLockdownFiles\%SystemRoot%/System32/drivers/Bettam164.sys
  • Verify it contains the same information
• Go to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\PnpLockdownFiles\%SystemRoot%/System32/drivers/Alpham264.sys
  • Edit the Source entry to your %SystemRoot%\System32\DriverStore\FileRepository\ bettam12_*\Bettam264.sys
• Look for Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\PnpLockdownFiles\%SystemRoot%/System32/drivers/Bettam264.sys
  • Verify it contains the same information
• Go to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Setup\PnpLockdownFiles\%SystemRoot%/System32/drivers/Alpham164.sys
  • Edit Source to your %SystemRoot%\System32\DriverStore\FileRepository\bettam12.inf_*\Bettam164.sys
• Go to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Setup\PnpLockdownFiles\%SystemRoot%/System32/drivers/Alpham264.sys
  • Edit Source to your %SystemRoot%\System32\DriverStore\FileRepository\bettam12.inf_*\Bettam264.sys
• Look for Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Setup\PnpLockdownFiles\%SystemRoot%/System32/drivers/Bettam164.sys
  • Verify it contains the same information
• Look for Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Setup\PnpLockdownFiles\%SystemRoot%/System32/drivers/Bettam264.sys
  • Verify it contains the same information
• Search for Bettam1, result should be Computer\HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB in a VID Key
• If not Search for Alpham1 in that tree and change LowerFilters to Bettam1
• Go to Computer\HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Alpham1
  • Change ImagePath to your "Saved Bettam Drivers\Kernel2k\Bettam164.sys" folder
• Look for Computer\HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Bettam1
  • Verify it contains the same information
• Search for Bettam1, result should be Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB in a VID Key
• If not Search for Alpham1 in that tree and change LowerFilters to Bettam1
• Go to Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Alpham1
  • Change ImagePath to your your "Saved Bettam Drivers\Kernel2k\Bettam164.sys" folder
• Look for Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Bettam1
  • Verify it contains the same information
• Go to Computer\HKEY_LOCAL_MACHINE\SYSTEM\DriverDatabase\DriverInfFiles\oem34.inf
  • Change both Default and Active to your "bettam12.inf_*" folder thats in System32
• Go to Computer\HKEY_LOCAL_MACHINE\SYSTEM\DriverDatabase\DriverInfFiles\oem35.inf
  • Change both Default and Active to your "bettam12.inf_*" folder thats in System32
• Go to Computer\HKEY_LOCAL_MACHINE\SYSTEM\DriverDatabase\DriverPackages\alpham12.inf_*
  • Change InfName to Bettam12.inf
  • Change OEMPath to your "Saved Bettam Files\Kernel2k" folder
• Search for Bettam1, result should be Computer\HKEY_LOCAL_MACHINE\SYSTEM\DriverDatabase\DriverPackages\alpham12.inf_amd64_932fbe5113b0010d\Configurations in a HID_Keypad entry
• If not Search for Alpham1 in that key and change LowerFilters to Bettam1
• Look for Computer\HKEY_LOCAL_MACHINE\SYSTEM\DriverDatabase\DriverPackages\bettam12.inf_*
  • Verify it has the same information as the previous Alpham1.inf_* entry
• Search for Bettam1, result should be Computer\HKEY_LOCAL_MACHINE\SYSTEM\DriverDatabase\DriverPackages\bettam12.inf_*\Configurations in a HID_Keypad entry
• If not search for Alpham1 and change LowerFilters to Bettam1

If any of the Alpham entries are missing, or you previously renamed any of the Alpham keys, reinstall Zenginge from scratch and then start from the beginning of these steps.

Reboot your computer with Driver Signing Disabled again and See if Zengine is working. If Zengine is red Open Device Manager. Verify the Bettam164.ys and Bettam264.sys are listed, If they are missing and if there is no Alpham164.sys or Alpham264.sys then
begin updating drivers. Use the saved Bettam drivers in your Kernel2k path. If everything is working you can reboot normally.