Windows 10: A True Fix for Cameras with corrupted firmware defaulting to `WebCam`

If you're here you've exhausted any and all hope of getting your camera working after searching post after post and seeing the same basic firmware latest checks.I hope I can solve this for you tooGreatest thanks to Lukasz Pawlowski -- MS for the OG post that helped me realise that the issue was firmware-related.ScenarioYour webcam suddenly stopped being recognised, mic and all.Your webcam is an older model Microsoft LifeCam Studio in my caseHappened during a Windows 10/11 update or just a period where it went from working with no obvious recordYour Device Manager now states your webcam from

:)

 

Setting up a webcam as the camera default

Hi Kevin

Method 1: If the Webcam is listed under Devices and printers, please follow the steps.

a. Press Windows key + R

b. Type: control printers

c. Hit Enter

d. Check if the Logitech webcam is listed.

e. Right click on Logitech webcam.

f. Click on Set this device as default.

Follow method 2 if webcam is not listed.

Method 2: What best we can do is we can disable the Internal webcam. You will be able to enable the webcam anytime you want.

Please follow the steps to disable HP Envy Webcam.

a. Press Windows + X, click Device Manager.

b. Click Imaging devices.

c. Right click on webcam.

d. Click Disable.

 

Reusing old laptop webcam as USB camera

I took the webcam from an old Compaq 620 laptop and after a few wire connections I can connect it to the USB port

For a few seconds it is detected as HP Webcam 2.0 in device manager under Cameras (which also shows the built in Webcam for this laptop), but then after a while the Device Manager window refreshes and the webcam from the old laptop goes under the node Imaging Devices and it is listed as HP Universal Camera Driver. The old laptop is broken so I cannot test it again, but if I remember correctly it's webcam used to shown as HP Webcam 2.0 as well, in device manager

However, the problem is that the external USB camera is not detected by any application. I have tested using online webcan test sites (eg, Webcam Test) and using Skype's camera settings window (it shows a preview of the selected webcam), but in both cases I can only see the built in webcam on the detected cameras list

Since the USB camera initially shows up as HP Webcam 2.0 for a few seconds initially (when auto installing drivers for the first time), if I manage to open skype's audio settings window within that period, the USB webcam does show up in the detected cameras list, but by them it will have become detected as HP Universal Camera driver and disappears from the skype camera list.

I have seen blogs and videos online of other people using their old laptop webcams as external USB webcams, so this should be possible for at least some models. Since it is consistently detected as a USB device I am supposing the connections are correct as well. I do have 4 diodes connected in series to the USB +5V line before it goes to the camera, and each diode drops about 0.5 V, so the camera is only seeing about 3 V. Since USB detection works up to the driver auto-installation point I am assuming power isn't an issue.

Is there anyway to test whether this webcam works as a USB webcam or not? Could this just be an issue of finding the correct drivers? Once this gets detected as HP Universal Camera Driver in the device manager, going to driver upgrade and auto-searching online only says the best driver is already installed. I have also tried searching for compaq 620 webcam windows 10 drivers but they don't seem to be available. Is there some kind of generic driver that should always work with any camera? Could this be a windows 10 issue? Would this work on linux? I'm not sure how to test webcams on Linux though.

EDIT:

I found possible drivers here:

HP Compaq 620 Drivers Download for Windows 10, 8.1, 7, Vista, XP

I could not find camera drivers for Windows 10 in HP's official page. This new linked page claims the camera driver is for Windows 10, and says the device name is HP Webcam [2 MP Fixed], which is what I expect, downloading the driver downloads files whose name implies camera device is manufactured by realtek. While using the webcam in my old laptop before I never recall Realtek being associated with anything to do with the webcam (this name was associated with the network card only) and looking at the PCB of the webcam itself doesn't indicate it is related to realtek in any way. Would it be risky to try and install this driver anyway? The new laptop is also an HP with the webcam being detected as Asus. I just don't want the drivers for the USB webcam to interfere with the built in one.

EDIT 2:

I installed drivers from the link above. The camera now shows up under Imaging Devices (not sure why it does not show up under Camera like the built in webcam) node as HP Webcam 2.0. It is also detected by applications such as skype (shows up in camera setup window's detected cameras list) but if I select the webcam skype just hangs up and I need to force close it from the task manager. If I disconnect the webcam the built-in webcam shows up and skype runs normally. The driver download link above comes with a webcam testing utility called "RsCap.exe". This utility also shows the usb webcam in it's list, but hangs if I select and try to preview the webcam. If I disconnect the webcam the built in webcam previews normally and is pretty fast.

I booted the computer using a USB live install of puppy linux and used the built in USB scanning tool to scan for everything connected to USB. This is what it shows regarding the usb webcam and the built in webcam.

Built in webcam:

Usb webcam:

Is there anyway to use this usb webcam?

 

choose default webcam windows 10?

Thanks for the reply.

• Build 16299.192
• No, I didn't changed anything.
• I have 4 webcams 2 real and 2 virtual. (Logitech Brio, Logitech C920, Droidcam, Reallusion virtual cam

I need to chose the default webcam, because UWP apps work bad when wrong camera is chosen at the start. For example, camera app will not let me change the camera if the first one do not works with it as intended. That is why I really need the ability to
chose the default webcam. And that' not only me, many people seek the answer for 2-3 years here.