Windows 10: A Vast Range of Errors

Hello,for clarification, these are my PC specs:Ryzen 5 3600 not OC CPU,MSI B450m PRO-VDH Max MBO,MSI Ventus 2x RTX 3060 Ti GPU,Corsair Vengeance 2x8GB 3200MHz DDR4 RAM,Corsair RM650 PSU,WD Green 240GB SSD Boot drive+ 2TB Seagate Barracuda.My issues started around a month ago, with ASUS Com Service crashes atkexComSvc.exe failed, even though my PC has no Asus components, neither do I use any Asus software. A fix I found online was disabling the Asus services, which I did and the crashes usually just black screens which do not response do anything and force me to hard-reset with the power but

:)

 

Good surround sound headset

I know you say you're not that guy, but stepping into the $250+ range really brings a change in build quality that might have you never having to buy another set. Otherwise, getting 6 speakers with decent sound in a headset is hard, and that's what you are asking for, and I have no suggestions, but just a bump up the list. *Stick Out Tongue

 

Help, Out Of Range!

Hi,

This issue may happen if the signal from the video adapter exceeds the scan range of your monitor. This may also occur from problematic video card and motherboard.

For us to better assist you, please answer the following questions:

• Can you tell us the troubleshooting steps that you've tried to resolve the issue?
• Is the error automatically showing after booting up your PC?
• Do you have another display cable to try aside from VGA cable?

As an initial troubleshooting step, try booting your PC in safe mode and adjust the display adapter settings
by following the steps below:

• Once you were able to boot in safe mode, right-click on your desktop screen.
• Select Display settings.
• Click Advanced display settings.
• Scroll down and select Display adapter properties.
• Click on Monitor tab.
• Under Screen refresh rate, select 60 Hertz.
• Click Apply, then OK.

Update us with the outcome so we can provide further assistance.

 

SONY PROJECTOR VPL EX4 - FREQUENCY IS OUT OF RANGE

Hi,



Thank you for writing to Microsoft Community Forums.



I appreciate the time and efforts you have taken in trying to resolve this issue. I understand that you receive an error Frequency is out of range.



I have been researching on this issue and found the similar troubleshooting steps that you have tried. However, you may want to give a try to the troubleshooting steps mentioned in the Sony article

Error: Frequency Out of Range and see if that helps.



If the issue persists, I would suggest you get in touch with the
Sony support team and check for any other settings.



Regards,

Nikhar Khare

Microsoft Community - Moderator