Windows 10: Accessing a drive connected to router

I have a hard disk connected to my router's USB port. I confirmed that the HD is compatible with the router.My goal is to use this HD as a 'network attached storage' so other computers on the same wireless network can access to HD to add files to it or download anything that's on the drive, like pictures.I tried several suggested solutions offered on these support pages and nothing worked. I cannot even map the drive to my desktop PC that is connected to the router with a wire.The weird thing is that the router functions as a DNLA server so my network streamer has access to all the music fil

:)

 

W10 can connect to wider internet but cannot access web pages

I have an odd issue with my W10 laptop linked to Sky broadband in the UK via wifi using a Sky router. The effect is that while I can actually access the internet (I can send and receive emails using Outlook and can connect to other machines using TeamViewer) I cannot access any web site (Google, BBC etc). There is no specific error message, merely that the access request timed out and a suggestion that it may be to do with proxy.

I have tried the following:

1. Other systems (W10 and ios) can access web sites using the same Sky router (therefore probably not a router problem)
2. I have sent and received emails using Outlook, so the broadband connection is working (probably not a Sky problem)
3. I have tried two different browsers (Firefox and Edge), no connection (not a browser problem)
4. I am using Windows Defender and have:
   1. Made sure that Firefox is in the list of allowed systems in its Firewall, no connection after a reboot
   2. Turned off the Firewall and tried again - no connection

My next step will be to re-install Windows, but has anyone got any other suggestions? Could it be some sort of virus (I have carried out a complete virus check using Defender)

So - any suggestions?

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

I cant access to my wifi router

Wifi router

Hello marcosamerio..
If you are unable to connect access your wifi router then there must be some problem with connection. I think the following step scan help you to connect it properly to wireless router.

Connect your computer to the wireless router. Although you can access the router wirelessly, it is better to use an Ethernet cable to directly connect to your router so that you can securely adjust router settings. Plug the Ethernet cable into the appropriate Ethernet jack on your computer. Plug the other end of the cable into any one of the open Ethernet ports on the back of your wireless router.

2. Open a Web browser. In the URL address field, enter the IP address for your wireless router. This information should be contained in your router’s manual. If you cannot find it, enter “198.168.1.1” as the address. This is usually the default IP address for most routers.


3. Enter the username and password for your router. This should also be supplied in the router’s manual. If you don’t have this information, go to the RouterPasswords website and find the brand and model of your router. This site lists the default login information for most wireless routers.

4. You should now be able to see your wireless router settings. You can configure your network ports, as well as SSID (wireless network name) and passwords.