Windows 10: "Add Bluetooth or other" devices not working

I recently bought a Bluetooth dongle that didn't work, I had a suspicion that it didn't support Windows 10, so I got another one, that didnt work either. I almost gave up then I decided to get a Network Card, which I know supported Windows 10 and had Bluetooth, but none of these work. Please help.

When I try to pair a device I press "Add Bluetooth or other device" so that I could pair my Airpods to my PC, but the black/gray pop-up menu just disappears with no error messages. I have tried install, updating, uninstalling and reinstalling drivers. I cant figure it out, please help.

:)

 

Cannot use bluetooth device

mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

 

Cannot use bluetooth device

1 Pairing is done in Settings, Devices
1.1 You click on Add Bluetooth or other device
1.2 You choose Bluetooth
1.3 If there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
1.4 The computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then Windows could not detect it.
1.5 It connects - pairing includes connecting
1.6 The computer sounds a buzz in the earpiece then displays Your device is ready to go and you click on Done
1.7 The device is shown in the devices list below the subheading Audio and it shows it as connected
1.8 The device should also appear in Control panel, Sounds, Playback tab
1.9 The device should also appear in Control panel, Devices & printers
1.10 {I just paired some bluetooth earphones as I typed so I could make sure these notes were correct} You use a music player and the sound comes out of the bluetooth earphones

2 If this is not happening for you then go to Contol panel, Devices & printers
2.1 Right-click on the device & select Remove device
2.2 You can now try pairing from scratch again
2.3 Several other users have reported that only removing the device with Bluetooth command line tools - BluetoothInstaller allowed them to re-pair again [see xzion's guidance below]
2.4 Yet others reported that only the KeithM code or Bungee's guidance worked for them [see below]

3 Where is this all going wrong for you?
[I assume we are definitely talking about bluetooth headphones/earphones. I understand that WiFi ones do also exist.]


4 Additional guidance -

Unpair a Bluetooth Device - TenForumsTutorials
Connect a Bluetooth device in Windows - Windows Help

Steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #22, KeithM] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #39, Bungee] - TenForums
Several people registered in TenForums just to be able to thanks xzion, KeithM & Bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.


Denis

 

No bluetooth after system restore

Thank you for your reply.

I mean I have used a Windows system restore point. I tried restoring bluetooth with commands in CMD (sfc/scannow; DISM /Online.....) and by updating and uninstalling devices in the device manager. Update did not work. Uninstalling bluetooth devices made Bluetooth disappear out of the hidden devices list.
All my steps I took worked but did not change anything in my bluetooth device list.

I am using the bluetooth of my mainboard. MSI Z370M Gaming Pro AC
My guess would be, that disabling the bluetooth network adapter before using a system restore point, disabled Bluetooth after using the system restore point.

In the device manager I get this message in the USB Device list for a unknown USB Device:
Windows has stopped this device because it has reported problems. (Code 43)
A request for the USB device descriptor failed.