Windows 10: Adding/unblocking a port/network

Hi, I have been trying to connect to a server via an ftp client, which I have been doing regularly but suddenly it says it can't establish the connection. The suggestion from the provider was to unblock Port 21 from the firewall. Can I get some guidance on how this can be done?

:)

 

dns unblocker on Edge

Hello,

Edge does not permit add-ons. Are you sure you weren't using Internet Explorer or another browser?

Try the steps listed in this removal guide.

http://howtoremove.guide/remove-ads-by-dns-unblocker/

 

Cannot unblock blocked number

I have a phone number in my blocked numbers list that was added in error. I cannot unblock the number. I have tried holdong down the number and telling the phone to unblock it. I have also checked the box next to it and pressed unblock. I get a message
the number has been unblocked, but when I go back and check the number is back in the list. I even unblocked all the numbers in my list. all were unblocked except the one. I would appreciate some guidance. Thanks.

 

Help needed with simple wired network

Step one- Connect all PC's to router, and then the router to the modem. PC's go to router by the ports labeled "1-4" on the back of the router. WAN port goes to router. Power up all network equipment, and then systems.
Step two- Power on the computer connected to port one. Go into router settings at 192.168.0.1 and configure internet, dyndns, firewall, etc.
Step three- Go to "network set up wizard" in windows. (Network places- network set up wizard). The rest is self explanatory.
Step four- right click on each drive and printer you want to share, and then configure sharing preferences. Should be easy enough.
Step five- right click my computer, and the select "map network drive". Using the network address for each piece of hardware you shared, assign network drive letters.

Congratulations, you have a fully operational network. Happy Gaming! *Toast :toast: