Windows 10: after a power outagge my printer went "offline" and now it doesn't work

see above subject

:)

 

Windows doesn`t start. Authomatic repair doesn`t work.

Thanks again!!

I`m sorry I had not noticed that the text on the picture was in spanish. It says that windows has replaced some damaged clusters in "name" file and "directory". Then, at the end "an unspecified error occurred (75736e6a726e6c2e 4f6)".

I`ll do it and I`ll be updating this thread when I have the report.

- - - Updated - - -

I ran SeaTools. These are the results:




Does it mean my HDD is useless?

 

Printer isn´t working after latest update.

After the latest update from Windows, my Canon Pixma ip6600 printer isnt working. In Device Manager it shows up as working properly but when I go to print it isn´t listed as an option in any programs. Troubleshoot suggests it´s a USB 2 printer on a USB
3 port and that that´s the problem but that cant be since it worked fine before the update. I´ve tried to uninstall and plug it back in but that doesn´t work either.

 

Both printers register offline for Windows 10

Hi,

Thank you for the update.

Resetting the power to your printer is a quick way to reset the printing system and prepare for further troubleshooting if necessary.

• 
  If the printer is off, turn on the printer, and then check the status of the printer:
  • 
    If the printer starts printing jobs from the print queue, your printer is clearing out queued print jobs and is online. You can stop troubleshooting.
    
  • 
    If the printer goes to an idle state after its startup routine, it might be online.
    
  • 
    If the computer still shows the printer as offline, continue using these steps.
    
• 
  With the printer turned on, disconnect the power cord from the printer.
  
• 
  Unplug the printer power cord from the wall outlet.
  
• 
  If you are using a USB cable or network cable, make sure that the cable has not become disconnected or damaged.
  
• 
  Wait at least 60 seconds. Restart the computer while you are waiting.
  
• 
  Plug the power cord back into the wall outlet.
  
• 
  Reconnect the power cord to the rear of the product.
  
• 
  If the printer does not turn on by itself, press the Power button to turn it on.
  
• 
  Try to print.
  • 
    If you can print, the printer is online again. Continue to the next step if the printer goes offline again when printing later.
    
  • 
    If the printer cannot print and remains offline, continue to the next step.