Windows 10: After changing to uefi from legacy in the Bios my computer won’t boot

After changing from legacy to UEFI my computer will turn on with no boot screen or anything, it will sit for hours with no signal without turning off if I let it, I wiped my my hard drives of the windows 10 os before changing this option, since I was trying to install windows 11 from usb and needed to enable secure boot. I converted one of the hard drives to gpt, thinking that was the issue, changed the motherboard, took out cmos battery for a couple of hours, etc. Is there a fix for this? Do I need to buy another hard drive?

:)

 

Return to Legacy from UEFI - BIOS

Hi There

A while ago I was helped here to change from Legacy to UEFI. However, since then it seems, the Laptop (Latutide E6420) is running a bit slowly which was otherwise very quick until then. Now, it takes nearly a minute or so to boot up or shut down or even
to close a file. Just a couple of days ago, I updated the latest BIOS for this machine recommended by Dell.

I tried to go back to Legacy but the system was asking me to reset to UEFI or face boot problems. One advise said that I could disable 'Secure Boot' in Boot Manager and reset to Legacy. However, the Boot Manager is listed under UEFI Boot process and it only
starts Windows. Is there any way as easy as I changed it? This is absolutely under the hope that all will be as normal as it was in the beginning. Please give your thoughts and advice. Thanks.

 

Windows fails to detect UEFI BIOS, assumes Legacy instead

Hi,

Due to some string of events, my computer has quick boot enabled in BIOS. I need to load UEFI to change some things, and am unable to because this setting is enabled. I assumed there was a way to reboot into UEFI from inside Windows 10, so I looked up how
and found the answer: There is an option in the "Advanced startup" menus to do this. Unfortunately, this option seems to be hidden if Windows 10 erroneously detects that you are using legacy BIOS instead of UEFI. This appears to be the case in my current install
(in MSINFO the BIOS Mode is set to Legacy).

My questions are:

• How do I change BIOS Mode to UEFI in my current install?
• How do I make sure this remains the case in future OS resets/reformats?
• Similarly, when building other computers in the future, how do I make sure Windows 10 does not make this same error?

My questions are not:

• How do I access my BIOS despite Windows 10 misidentifying my BIOS Mode?

Thank you for your time,

Alex

 

Support Had Me Change From UEFI to Legacy mode in BIOS Re: DISASTER

This was Acronis True Image 2018 support not MS or Lenovo (P51). Those familiar with True Image know that you can create bootable media on a flash drive to run the software. No problem with True Image 2017 but True Image 2018 did not work. Although the flash drive loaded the program the GUI was garbled and I was unable to navigate. Support had me switch from UEFI back to Legacy and that was a bad idea. Sorry for the caps but this was what I wrote back to Acronis support. FYI the rest of the message was not in caps:

SUPPORT: I have discussed this issue with the Experts team and they have suggested testing whether changing from UEFI to Legacy mode in BIOS fixes the issue or not. This step is suggested for testing purpose only.THAT WAS A TERRIBLE SUGGESTION. I WENT INTO THE BIOS AND DID AS YOU INSTRUCTED AND CHANGED FROM UEFI TO LEGACY. I CLICKED EXIT AND SAVE AND WITH THE FLASH DRIVE PLUGGED IN THE 2018 BOOTABLE MEDIA I WENT TO BOOT MENU OPTIONS AND CHOOSE BOOT FROM FLASH DRIVE AND I WAS DROPPED BACK INTO THE BOOT MENU OPTION. SEE ENCLOSED PICTURE. I THEN SELECTED BOOT FROM THE SSD DRIVE AND I WAS AGAIN STUCK IN A LOOP THAT DROPPED ME BACK INTO THE BOOT MENU OPTION. I THEN TRIED BOOTING FROM THE SECOND INTERNAL HDD OPTION AND AGAIN WAS DROPPED BACK INTO THE BOOT MENU. I COULD NOT GET BACK INTO THE BIOS TO CHANGE BACK TO UEFI FROM LEGACY. I HAD TO DO A HARD SHUTDOWN AND POWER BACK ON AND ONLY THEN WAS I ABLE TO GET INTO THE BIOS AND CHANGE BACK FROM LEGACY TO UEFI.

This is a pic of the loop I was caught up in. Why do you all think I was not able to boot either from the flash drive or the SSD or the HDD once I changed from UEFI to Legacy in the BIOS? TIA.