Windows 10: After clean install of Windows 10 both my DVD drives fail to work

Hi,


I've clean installed Windows 10 and now neither of my DVD writer drives work. They both show up in Windows Explorer and device manager says they're working properly, but if a disc is inserted it is not recognised and if I click on the drive I'm asked to inset a disc and the drive tray opens.


Not really sure what to try as they worked fine prior to the clean install and no hardware changes have been made. The drives are TSSTcorp CDDVDW SH-S223C.


Thanks for any thoughts,


Phill.

:)

 

Is it time for Windows 10 already?

Here's a good step by step guide on doing a fresh install.

http://m.hexus.net/tech/features/software/85085-how-clean-install-windows-10-usb-drive/

 

Windows 7 Professional keeps dropping the DVD/CD drive

Working with a fresh install (2nd attempt) of Windows 7 Professional on new hardware. The motherboard is a Gigabyte EP45-UD3P. Running 4G of RAM and an Intel Q9400 Quad Core CPU. The DVD/CD optical drive is a Pioneer DVR-218L.

Here's the problem - after two fresh installs, Windows 7 drops the DVD/CD drive and I get the following error in Device Manager (The device cannot start {code 10}). After the install, the drive works for a period of time, then stops working and I get the error code.

The driver appears to be a standard Windows driver (CD-ROM driver).

I've tried uninstalling the drive and re-installing it in Device Manager but it does not work - I continue to get the device error.

I've also swapped out the DVD/CD drive to insure it's not a bad unit. Same problem with both drives.

What do you suggest for next steps?? Could it be an issue with the motherboard?? A driver problem?

I visited the Pioneer web site - could not find any help or additional Windows 7 drivers.

What now??

 

Clean Install Workaround for Vista

You may remember this news story on techPowerUp! a couple of days ago relating to the lack of clean installs when using the Upgrade Editions of Vista, which required an old OS to be installed. However, Paul Thurrott has managed to find a workaround for this issue, which ironically lets users do a clean install Vista without any previous version of Windows, albeit a little tedious. Here are the steps:

• Boot from the Windows Vista Upgrade DVD as normal
• When prompted for a product code, leave this blank
• Select the version of Vista you have purchased and let Vista install
• When you boot to your desktop for the first time, run the Vista setup from Windows
• This time enter your product key
• When asked whether you want to do an Upgrade of Custom install, select custom and choose a clean install
• Windows will now install for a second time and you should be able to activate it

Remember, these steps are only advised for use in order to achieve a clean install of Vista, it is only legal to use the upgrade editions if you have previously purchased the appropriate version of Windows.

Source: DailyTech