Windows 10: After Formatting my Laptop I get error booting

After formatting my Samsung laptop with windows 10, I get the following error : All Boot options are tried. Press F4 key to recover with factory image using recovery or any other keys for next boot loop iteration.... when I press F4 it just loops me back around. No other keys are working. I have tried the toggling the secure boot option in BIOS but I do not get the option to choose what OS to use.The command line I used to format is as followsISKPART> CLEANDISKPART> CREATE PART PRIDISKPART> ACTIVEDISKPART> FORMAT FS=NTFS LABEL=C QUICKDISKPART> FORMAT FS=NTFS LABEL SURFACE QUIC

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Formatting a dual boot system with windows 10 and ubuntu

Hi,

In Windows 10, you can easily format a hard drive or a partition by accessing Computer Management. For us to assist you, we suggest that you follow the steps listed below:

• Press the Start button.
• Type Computer Management.
• On the left side, click on Disk Management under Storage.
• Locate the drive that you want to format.
• Once located, right-click on the drive and choose Format.

If the hard drive has not been formatted with the steps that we have provided above, we recommend that you contact the manufacturer of your hard drive. Some hard drive requires a software that you'll need to use just to format it.

Let us know how it goes and if you need further assistance, feel free to post back.