Windows 10: After install the KB5039212 Windows 11 update problems with my surface pro 6

Hi,Installing the KB5039212 Windows 11 update on my Surface Pro 6 and Surface Studio Laptop result in the following problems:Surface Pro 6 & Surface Studio Laptopwhen both devices are connected with my Surface Dock 2 the didn't charge any more. Devices connected to the Surface Doch 2 USB ports will charge normally.Surface Pro 6 onlythe toch screen doesn't work anymore.Both devices will charge normally with the Microsoft Surface 127W Power Supply.How can I fix this problem?GreetingsDanny Van Neyghem.

:)

 

Windows 11 install on new Surface Pro

Installing Windows 11 on a new Surface Pro or any compatible PC involves aseries of steps. please note

that the process can very slightly depending on the specific model of Surface Pro you have and the

harware requirements for windows 11. Here is a general guide to help you instal Windows 11 on a

campataible surface Pro:

Before You Begin:

1. Check System Requirements: Ensure that your Surface Pro meets the minimum system requirements for Windows 11. These requirements may include a compatible processor, a certain amount of RAM, and TPM 2.0 support.
   
2. Backup Data: Before proceeding, back up any important data on your Surface Pro to prevent data loss during the installation process.
   

Installation Steps:

1. Download Windows 11: Visit the official Microsoft website to download the Windows 11 installation media. Microsoft usually provides tools for creating bootable USB drives or ISO files.
   
2. Create Installation Media: Use the downloaded Windows 11 installation files to create bootable media. You can either create a bootable USB drive using tools like Rufus or use the Media Creation Tool provided by Microsoft.
   
3. Insert Bootable Media: Insert the bootable USB drive with the Windows 11 installation files into your Surface Pro.
   
4. Boot from USB Drive: Restart your Surface Pro and boot from the USB drive. You might need to change the boot order in the BIOS/UEFI settings to prioritize the USB drive.
   
5. Install Windows 11:
   
   • Follow the on-screen instructions to begin the Windows 11 installation process.
     
   • Choose your language, time, keyboard input, and other preferences.
     
   • Enter your Windows 11 product key if prompted.
     
6. Partition and Install:
   
   • When prompted, select the partition where you want to install Windows 11.
     
   • Follow the installation wizard to complete the installation process.
     
7. Set Up Windows 11: After installation, follow the initial setup process, including creating or signing in with a Microsoft account, choosing privacy settings, and customizing your desktop.
   
8. Install Drivers: Visit the official Microsoft Surface support website to download and install any necessary drivers and firmware updates for your specific Surface Pro model.
   
9. Install Software: Install your desired software and applications. You can download and install software from the Microsoft Store or other trusted sources.
   
10. Windows Updates: Make sure to keep Windows 11 up to date by regularly installing Windows updates through the Windows Update feature.
    

Regard!

...

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

New Surface Pro 5 and Surface Pro 6 firmware for Windows 10 - Aug. 29 Surface

Source:

• https://support.microsoft.com/en-us/...update-history
• https://support.microsoft.com/en-us/...update-history