Windows 10: After mobing my windows drive to another pc it wont boot

I keep getting an error which says that it cant find the winload.efi file. I can open the drive on another pc and see the winload.efi file in the E:\windows\system32\ directory. I've tried to turn CSM support on/off and secureboot on/off. I used Diskgenius to convert the partition to gpt but still cant boot in CSM or UEFI. I can't get any images as my laptop doesn't have a camera.

:)

 

PC wont boot up (No POST, No Video)

I recently installed a new Asus M5A99X Evo r2.0. The motherboard green LED lights up and the case and cpu fans spin. But there is no video when its hooked up to my monitor.

Steps that i have tried:
http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

Made sure all connections are properly connected.

Flashing the CMOS

Tested the PSU

Followed all steps in the user manual

If there are any links that you guys can point me to or suggestions that could help it would be highly appreciated. Thank you

 

Win 10 won't boot, if I disconnect secondary drive(s)

1. Download: Macrium Rescue ISO 6.1.1000 and use: Rufus - Create bootable USB to create a USB Boot.
2. Disconnect Disk 1 from your PC
3. Boot up your PC using the USB in step 1
4. Follow the screen shot to fix Windows Boot

 

Windows 7 booting off wrong drive?!?!?

Please move if this is in the wrong place.

I have two hard drives, a 1.5TB drive, and a 160GB drive. Windows is installed on the 1.5TB drive, as are all my files and programs. The 160GB drive has a bunch of old files, and apparently the bootmgr and boot folder. Nothing else is on the 160GB drive, other than media files etc.

If I remove the 160GB drive from the machine, windows refuses to boot, plug it back in, it works fine. The setup with two hard drives I have now is temporary, as the 160GB drive will go into another machine.

My question is, can someone give me a step by step on how to make windows force to boot off the 1.5TB drive, ignoring the 160GB drive in the boot process completely?
I don't know how to do this in Windows 7, on XP I would just run the /fixmbr command and its related ones.

Any help would be appreciated.

Note: I would really really rather not have to wipe and reinstall, I know it can be done without one as I've had this issue with XP before.