Windows 10: after reset when my pc starts there is other user problem

when i reseted my laptop the other user problem came. i found a solution on microsoft website but after the window button and nothing works you can only move the mouse plz help me

:)

 

router logs DoS attack from a local PC....

Well you did not say that you don't really know what you are doing. It's not a problem of course, but it changes things a little.

It's not even clear if the PC or the router is the problem at this time, so I suggested that you disable some unnecessary things which are usually known to cause many problems, sorry if those were too complicated.

• You could reset some network related stuffz on the PC as a next step. Open an elevated command prompt (run as administrator), and enter the followings on the PC:
  netsh int ip reset reset.log
  netsh int ipv6 reset
  netsh winsock reset
  netsh branchcache reset
  netsh advfirewall reset
  (note: You can export your current firewall rules in the "group policy" before the reset if it's needed for some reason)
  
  
• Btw, Would it be a problem to reset the router to the default settings if the things we are trying will not help? There is a menu point for that called "factory settings" (and also a little hole on the back if you prefer that one).. the Administrator username in the router after the reset would be admin and the password is probably on a sticker at the bottom of the router (special settings needed to go online with your ISP might be also necessary)
  This is not needed now (not yet), but perhaps the source of the problem is at the router and not the PC in question, so we may come to that eventually.

ps.: Do you have a second network card you could test in that PC and a different cable to rule out some hardware issues on the PC side?

 

Unable to sign in after resetting PC, only Other User present

Hi,



Thank you for writing to Microsoft Community Forums.



I understand that you have reset the PC and there is no other user account apart from other user.



I would suggest you to boot the PC in to safe mode and check if you are able to login. Refer the section
From the sign-in screen in the article
Start your PC in safe mode in Windows 10.



If you are able to login to the PC in safe mode, try enabling the default administrator and then login to the PC. Follow the steps mentioned below to enable default administrator.

1. Open Start Menu and type
   CMD.
   
2. Now right click on it and click on
   Run as administrator.
   
3. Type the following command to enable hidden administrator:
   net user administrator /active:yes
   
4. Restart the PC and then try logging in to the
   Administrator account.
   

If you are able to login to the Administrator account, create a new user account and try to login. Refer the article

Create a local user or administrator account in Windows 10.



If you have any further queries, please get back to us with the results of the troubleshooting steps to assist you further.



Regards,

Prakhar Khare

Microsoft Community – Moderator

 

System start is slowed down

When I resete PC manualy or exit bios,there`s no problem with that. Any suggestions?