Windows 10: After resetting TPM, Windows 10 no longer recognises ethernet adapter

After upgrading the GPU in my system, on starting up a message appeared about TPM settings changing due to hardware changes and asking whether I wanted to rest the TPM.As I didn't have any of the security features in use that the TPM is used for I selected the option to reset.After logging in to Windows 10, it has been unable to connect to the internet. It cycles through "attempting to authenticate" on the ethernet adapter, "unidentified network" with no internet access, and finally "Network cable unplugged".The issue does not seem to be with the router/modem, as other systems connected are st

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

When resetting Windows 10, get a message "Your PIN is no longer available...", whether TPM is cleared or not.

When resetting Windows 10, get a message "Your PIN is no longer available...", whether TPM is cleared or not. I'm stuck trying to reset Win10 (and delete all files).

Steps followed were: 1) started Win10 reset. 2) at 8% complete, got message asking whether to clear TPM. ( I've tried it both ways and gotten same PIN problem).

3) Get a message: "Your PIN is no longer available due to change in security settings on this device." When I click on change PIN, get a message: "The User Profile Service service failed the sign-in. User profile cannot be loaded."

Any suggestions to complete a reset and disk clean are appreciated.

 

Need help on whether to clear TPM on not

It's clear as mud. As far as I can tell, it's specific to Windows, not necessarily activated programs like MacAfee, games, etc etc etc. MS Office, I have no idea.

Here's a lengthy doc on it: https://docs.microsoft.com/en-us/wi...initialize-and-configure-ownership-of-the-tpm