Windows 10: After the 22H2 update, my drive numbers switched around

before the update, C: was Disk 0 as it should and D: was Disk 1.after the update, C: was 1 and D: was 0.is there any way to change it back?pre- and post-update screenshots of task manager:

:)

 

How to get the Windows 10 2022 Update version 22H2 Win Update

If you can't install it from windows update you can try to install it manually, it's the same KB5015684 obtained with windows update.

Windows 10 Version 22H2 is coming in October 2022 ---> KB5015684 Provides Quick Windows 10 22H2 Upgrade - Ed Tittel On the Ed Tittel page click on the links DeskModder.de or .MSU x64 version of the upgrade.

KB5015684 Funktionsupdate auf die Windows 10 22H2 (19045) [Manueller Download] - Deskmodder.de

Do dism and sfc /scannow commands before and/or after installing it.

 

How to get the Windows 10 2022 Update version 22H2 Win Update

I wish things are that simple. My error code was 0x80246017, and I don't have KB5020435 installed so it's a dead end. BTW, MS lists like 6 or 7 error codes of the format 0x8024xxxx on the "troubleshooting WU problems", and when you chose next step, it suggests generic steps: run WU troubleshooter, check if your disk has no errors, is your remote disk is accessible, etc. Same as MS community; each similar error has completely different cause and (re)solution.
MS in notorious for this- if it works then OK, if it doesn't then good luck.

 

Intel Readies P55 Chipset B3 Stepping Update

Intel's is readying a hardware update for its P55 Express chipset, currently the only core-logic for the company's brand new socket LGA-1156 processor platform. The new B3 stepping of the P55 PCH will bring with it a little more than new MM number and S-spec numbers. A list of changes is as follows:

• New MM number and S-spec numbers for the converted products;
• Firmware and minor BIOS updates are required with the conversion;
• Processor MRC/microcode update required to enable future processors;
• Recommended storage driver upgrade from Intel MSM 8.9 to Intel RST 9.5.

Although it is listed that the MRC update enables 'future processors', Intel, in a statement issued to X-bit labs assured that the current B2 stepping of the chipset (found on current socket LGA-1156 motherboards) does not leave out support for any of Intel's new LGA-1156 processors that are slated for release in the very near future. The dual-core "Clarkale" 32 nm processor will be supported by both B2 and B3 steppings of the chipset.

P55 B3 stepping is pin-identical to P55 B2, and hence motherboard vendors will not have to come up with new designs. Sampling of the new stepping began as early as on October 02, 2009, and it is scheduled for shipment to manufacturers by the 7th of December, 2009. P55 is the performance core-logic for the LGA-1156 platform. It supports Core i5 and Core i7 "Lynnfield" processors with discrete graphics.

Source: X-bit labs