Windows 10: After updateing Windows10 completely I am getting This problem

After updating windows 10 i am geeting this problemLenovo G50-80 Windows is installed in SSDIntel UNDI, PXE-2.1 build 883 Copyright C 1997-2888 Intel CorporationThis Product is covered by one or more of the following patents: US6,578,884, US6, 115, 776 and US6, 327,625Realtek PCIe GBE Family Controller Series v2.57 88/27/13 PXE-E61: Media test failure, check cablePXE-MOF: Exiting PXE ROM.

:)

 

Windows Updated(16299.309).KB4088776 Restart is required to complete.

Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

Thanks for the suggestions and for the time to respond Best regards.


And thanks for the tip of that program, I'll have it on my list.

 

Intel E5200 Gets Updated, R0 Stepping Coming Up

Intel's Pentium Dual-Core E5200 processor is getting on course for a specifications update. The chip will feature in a new, improved Wolfdale-2M core, spec'd out as the R0 stepping, from its current M0 stepping. The new stepping is intended to add new instructions, power-management features, and bring about changes in the chip-package. A short list of known changes is as follows:

• CPUID changed from 10677 to 1067A
• Power State Indicator (PSI) support with Intel 4 series chipsets
• New instructions - XSAVE and XRSTOR
• New S-spec and MM numbers
• New halide-free chip package

Due to the changed CPUID, users may require BIOS updates to detect the CPU. According to the company, E5200 R0 should be out by April 13.

Source: TechConnect Magazine

 

Windows10 update

Hi Ray,

To troubleshoot your issue, we suggest doing these following troubleshooting methods:

Method 1

• Turn off your PC.
• Press and hold Shift then turn on your PC.
• Wait for the setup (set up fixes the problem automatically).

Method 2

• Create a media creation tool by following the steps in this
  link.
• Select your preferred installation option and wait for the process to finish.

Let us know how it goes.

Regards.