Windows 10: After uploading update for windows 10 my Surface 4 Pro is stuck on loop restarting and...

After uploading update for Windows 10 my Surface 4 Pro is stuck on loop restarting and "undoing changes made to your computer". I tried to restart it with F8, it did not work. I tried to restart and push for 10 seconds power button doing this three times, also did not work.

After disconnecting the keyboard I tried again push the power button three times and finally I got message: Error "Please insert the external storage media and press OK." What external storage media should I insert ?


I did not have media with backed-up system.


System went again into black screen with "Undoing changes made to your computer"

What should I do know ???

:)

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

I log in on Surface Pro 4 and it keeps saying shut down programs and resets, stuck in a loop

Microsoft Surface Pro 4, it prompts me to sign in and keeps saying windows needs to restart. Stuck in a loop. Any tips

 

Surface Pro Stuck in a boot loop

Hello all. Having some big issues with a Surface Pro. Yesterday, I did a check in Windows Updates and it found two firmware updates for this Surface. The updates were from January of this year. So I chose to download and install them. Not thinking, Bitlocker is on. Firmware updates on Surfaces with Bitlocker never mixes.

I am now getting a boot loop that only shows a windows logo and a small circle that slowly fills blue, almost fills but never does, and then reboots and repeats.

I have tried holding the power button for 30 seconds, the two button shutdown, inserting a Windows 10 USB, nothing. I'm out of ideas at this point.

Anyone have anything else? I need to get this machine back up and running ASAP if at all possible.