Windows 10: All USB 2.0 not working

I've just installed Windows 10 and all USB 2.0 are not working. Even Iomega external drive 1 TB is not working. The scanner works on all USB 2.0.


Drivers are updated but it seems some drivers cannot be installed. How should I proceed? Thanks,

:)

 

Intel Updates Core 2 Quad Q9550 to E-0 Stepping

We continue our Monday news list with another Intel story that brings to our attention information concerning the company and more specificly its 2.83GHz Core 2 Quad Q9550 chips that will move from the current C-1 to the newer E-0 stepping. The updated chips will start selling on August 22nd, featuring the following changes:

• New SSpec and MM numbers for the converting products
• CPUID will change from 0x10677 to 0x1067A
• Package change to Halide free package

Apart from that, the new stepping CPUs will not include any other changes. Of course, like most new stepping parts a BIOS update will be needed.


Product Change Notification 108663 - 00

Source: TechConnect Magazine

 

USB boot for bios update

Did the first step. It already doesn't work. Note the capacities and drive letters M:/N: The HP utility is about to format my raid-1 volume containing my 2 750gb drives. It thinks it's the usb stick. I can not select any other drives in the HP utility. My 512mb usb stick is U:.

Any other suggestions?

 

Help with USB VID_0000&PID_0002\6&32FA202A&0&8

Hi Nikolaos,

We suggest that you apply the troubleshooting procedures below:

Method 1: Run Hardware Troubleshooter
to diagnose issue with hardware if there are any on your computer. Follow the steps:

• Click Start or press Windows logo and go to
  Settings
• Search for troubleshooting and select Troubleshooting
• Go to Hardware and Sounds
• Select Hardware and Devices and click on next, then follow the on-screen instructions.

Method 2: Disable and re-enable all the Universal Serial Bus controllers (USB) controllers.The USB controllers represent the USB ports in Device Manager.

To disable and re-enable the USB controllers, follow these steps:

• Open Device Manager
• Expand Universal Serial Bus controllers.
• Note: You might have to scroll down the list to find this item.
• Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
• Repeat the above step for each USB controller that is listed under
  Universal Serial Bus controllers.
• Restart the computer. After the computer starts, Windows will automatically scan for hardware changes
• Reinstall all the USB controllers that you uninstalled

Let us know how it goes.