Windows 10: All USB devices turn off and returns to desktop then locks up for a solid minute if plugged...

I have no idea why this is happening. If I plug my laptop into a monitor while a video is playing, it locks up for like a solid minute and all USB devices turn off. Help please.

:)

 

unknown device USB

Hi Ali,

In most cases, this issue can be caused by either an unstable/ corrupt USB controller or your computer's drivers need to be updated.

For us to isolate the possibilities, we suggest that you perform the following troubleshooting steps in succeeding order:

• Connect your USB drive to a different port. Alternatively, try to connect it to a different PC.
• Connect a different USB drive to your PC.
• Unplug your USB drive and restart your system. Afterwards, plug it in and see if it works. If the same issue occurs, perform a complete shutdown and wait for a few minutes before turning it on again.
  
• Update your drivers.

If you find that the USB drive still doesn't work even after performing all these suggestions, this is most likely pointing to a hardware issue. Thus, it would be best to get in touch with your device manufacturer for a thorough check of the device.

If you have any other questions or concerns, feel free to post back and let us know.

 

Device Manager Un-Hiding Hidden Devices

When you connect a plug and play device, Windows Plug and Play manager detects it, finds and installs the driver. Device Manager lists the device with a solid icon.

The driver is only removed when you uninstall the device, not simply by disconnecting the device. When the device is disconnected, its driver is still installed. By default, Device Manager only displays connected devices. When you show hidden devices, note the Bluetooth icon you see is semi-transparent (not opaque). That indicates a "non-present" device. Sometimes also called a "ghost" device. The driver is still installed but the device is not currently detected (i.e. not connected).

Device can be disconnected when

• Device unplugged (e.g. removing a USB device)
• Turning a device OFF
• Disabling the device in BIOS (then windows won't detect it) or
• Device failure

So

• Check BIOS as suggested
• Check board connections
• Can b/t be turned off by a switch? or keyboard combination?

Also possible the b/t h/w failed

 

Issue with USB ports turning off

Hi Mattx1,

Thank you for posting your question in the Microsoft Community.

1. Does the issue occur with all the USB devices plugged in to the PC?
   
2. Does the issue occur when you plug in the USB device to any of the UISB port on the PC?
   
3. Did you make any changes to the PC prior to this issue?
   

Let us try these steps one by one to check if that makes any difference.

Step 1: Suggest you to run the Hardware and Devices Troubleshooter and check if that helps.

1. From the Settings screen, choose Update & Security.
   
2. Select Troubleshoot. Look for Hardware and Devices Troubleshooter and run it.
   
3. Follow the on-screen direction to complete the process and if required please apply the fix it.
   
4. Once it is done, please reboot the computer and check the status.
   

Step 2: Suggest you to uninstall and reinstall the USB drivers on the PC to check if that helps.

1. Press ‘Windows + R’ keys, type ‘devmgmt.msc’ in run window and press Enter.
   
2. In Device Manager, expand "Universal Serial Bus Controllers".
   
3. Right click a device under "Universal Serial Bus Controllers" and click uninstall.
   
4. Perform same step for other devices. When completed, restart the computer.
   

All USB controllers will reinstall automatically.

Article for Reference.

Automatically diagnose and fix Windows USB problems:
https://support.microsoft.com/en-us/help/17614/automatically-diagnose-and-fix-windows-usb-problems

Hope this helps.

Let us know if you got the help you needed by clicking ‘Yes’ or ‘No’.

Regards,

Srimadhwa B

Microsoft Community-Moderator