Windows 10: AMD Driver Update Somehow Removed Files and now Windows Security Center Cannot be fully...

lazerpoopface47 · Aug 7, 2021

One update to my AMD Drivers messed up my computer, it disabled the WIFI connection and also made it so the security center and Windows Apps like the XBOX app and Windows Store will open up but immediately close out before the application can be fully accessed. Windows Firewall can be accessed but it tells me I need to change some settings in order for it to protect my pc, but when i attempt to do so, i am given error 0x8007042c. I tried Using SFC But this Message Came up:Windows Resource Protection found corrupt files but was unable to fix some of them. For online repairs, details are include

:)

SteV1der · Aug 7, 2021

Windows Defender Security Center removes working HP Photosmart driver

I was going to do so (perform a roll back), but after thinking about it...are we sure it's a necessary step here? I didn't have Windows Defender Security Center operating on this system (or if it was, it wasn't showing up in the tray and it wasn't giving
an error message) until this last Windows update.

Are we sure that this is a necessary step? If all it does is remove the Security Center from the tray or remove that feature, then I'm not sure anything has been discovered.

This is Norton Security 22.9.3.13, in case that helps and as you suggest, Windows Defender Security Center is still showing "Actions recommended" in the tray at the bottom right.

Nikhar_K · Aug 7, 2021

SSD samsung evo and amd drivers

Hi,

Thank you for writing to Microsoft Community Forums.

The issue could be because of the AMD drivers installed on the computer.

Since the Samsung SSD is working fine with the Microsoft AHCI driver, I suggest you to update the AMD driver and check if that helps. To update the AMD drivers follow the steps from the article

Update drivers in Windows 10.

If updating the drivers didn’t help, I suggest you to roll back the driver to previous build and check if that helps. To roll back the driver to previous build follow the steps mentioned below:

Press and hold the Windows + X key on the keyboard.

Select Device manager.

In Device manager, expand IDE ATA/ATAPI controllers.

Right click on AMD SATA Controller and select
Properties.

Navigate to the Driver tab and click on Roll Back Driver.

Restart the computer.

Hope it helps.

Nikhar Khare

Microsoft Community - Moderator

Brink · Aug 7, 2021

Dell Client Platform Security Update for Dell dbutil Driver

The vulnerability exists in the dbutil_2_3.sys driver. This driver file may have been installed on your Dell Windows operating system when you used firmware update utility packages, Dell Command Update, Dell Update, Alienware Update, Dell System Inventory Agent, or Dell Platform Tags, including when using any Dell notification solution to update drivers, BIOS, or firmware for your system. To best protect yourself, Dell recommends removing the dbutil_2_3.sys driver from your system by following one of three options listed in Remediation Step 1 below.

Dell has remediated the dbutil driver and has released firmware update utility packages for supported platforms running Windows 10, Dell Command Update, Dell Update, Alienware Update, Dell System Inventory Agent and Dell Platform Tags. For supported platforms on Windows when you:

install a remediated package containing the BIOS, Thunderbolt firmware, TPM firmware, or dock firmware; or

update Dell Command Update, Dell Update, or Alienware Update; or

install the latest version of Dell System Inventory Agent or Dell Platform Tags,

The remediated dbutil driver is installed on your system. Refer to Remediation Step 2 for details.[/TD]

Dell Technologies recommends all customers consider both the CVSS base score and any relevant temporal and environmental scores that may impact the potential severity associated with a particular security vulnerability.

Affected Products and Remediation

The vulnerable driver (dbutil_2_3.sys) was delivered to impacted systems in two ways: (1) via affected firmware update utility packages, and (2) via Dell Command Update, Dell Update, Alienware Update, Dell System Inventory Agent, or Dell Platform Tags, including when using any Dell notification solution to update drivers, BIOS, or firmware on your system. The tables in the “Additional Information” section below provide the following information:

Table A lists platforms with impacted firmware update utility packages, including BIOS update utilities, Thunderbolt firmware update utilities, TPM firmware update utilities and dock firmware update utilities.

Table B lists the end of service life platforms with impacted firmware update utility packages, including BIOS update utilities, Thunderbolt firmware update utilities and TPM firmware update utilities.

Note: The dbutil_2_3.sys driver vulnerability does not impact the actual firmware updates that these utilities deliver. Rather, the vulnerability exists in the dbutil_2_3.sys driver that is packaged with the firmware update utility.

Remediation Steps:
Impacted customers must complete 2 steps as follows:

Immediately remove the vulnerable dbutil_2_3.sys driver from the affected system using one of the following options from Step 1 below: download and run a utility to remove the driver from the system (Option 1), manually remove the driver from the system (Option 2), or on or after May 10, 2021, utilize one of the Dell notification solutions to run the utility (Option 3).

As described in Step 2 below, obtain and run the latest firmware update utility package(s), Dell Command Update, Dell Update, Alienware Update, Dell System Inventory Agent, or Dell Platform Tags as applicable.

Step 1: Immediately remove the vulnerable dbutil_2_3.sys driver from the affected system using one of the options below. NOTE: If you are using the Dell System Inventory Agent you must first download the latest available version (2.6.0.0 or greater) here.

Option 1 (Recommended): Download and run the Dell Security Advisory Update – DSA-2021-088 utility.

Option 2: Manually remove the vulnerable dbutil_2_3.sys driver:

Step A: Check the following locations for the dbutil_2_3.sys driver file

C:\Users\<username>\AppData\Local\Temp

C:\Windows\Temp

Step B: Select the dbutil_2_3.sys file and hold down the SHIFT key while pressing the DELETE key to permanently delete.

Option 3 (available by May 10, 2021): If you use one of the Dell notification solutions, you can use it to obtain and run the Dell Security Advisory Update – DSA-2021-088 utility.

Scenario 1: If your Dell notification solution is configured to automatically notify you of updates, and configured to automatically download and apply them, then this utility is automatically downloaded and applied for you.Scenario 2: If your Dell notification solution is not configured to automatically download and apply updates, obtain the utility via one of the Dell notification solutions , by clicking “Check for Updates”, and then selecting and applying Dell Security Advisory Update – DSA-2021-088.
Step 2: To prevent reintroduction of a vulnerable dbutil driver, obtain and run a remediated firmware update utility package, Dell Command Update, Dell Update, Alienware Update, Dell System Inventory Agent, or Dell Platform Tags as applicable.
For firmware update utility packages: With your next scheduled firmware update, download and apply the latest available firmware update utility which contains a remediated dbutil driver. Customers can use one of the Dell notification solutions to receive updated firmware update utility packages, as applicable.Notes:

For supported platforms running Windows 10, updates are available as of the publishing of this advisory. (See Table A)

For supported platforms running Windows 7 or 8.1, updates are expected to be available by July 31, 2021. Once the updates are available, this advisory will be updated. If you update your BIOS, Thunderbolt firmware, TPM firmware, or doc firmware prior to the updates being available, you must also execute one of the three options defined in Step 1 of this section – even if you have previously performed this step – immediately following the update.

If you update your BIOS, Thunderbolt firmware, TPM firmware, or dock firmware, to a version prior to the versions listed in Table A, you must also execute one of the three options defined in Step 1 of this section – even if you have previously performed this step – immediately following the update.

Remediated packages are not be provided for end of service life platforms (see Table B). Customers using these platforms must also execute one of the three options defined in Step 1 of this section – even if you have previously performed this step – immediately after you apply an affected firmware update.

For Dell Command Update, Dell Update, and Alienware Update: These components are automatically updated with the self-update feature. If this feature is not enabled on your system, run your respective update application by connecting to the internet, opening it, and clicking “Check for Updates.”
For Dell Platform Tags: Visit here and download the latest available version (4.0.30.0, A04 or greater).

For Dell System Inventory Agent: Visit here to download the latest available version (2.6.0.0 or greater).
Click to expand...

Read more:

https://www.dell.com/support/kbdoc/e...-vulnerability

https://www.zdnet.com/article/patch-...er-since-2009/

Windows 10: AMD Driver Update Somehow Removed Files and now Windows Security Center Cannot be fully...

AMD Driver Update Somehow Removed Files and now Windows Security Center Cannot be fully...

AMD Driver Update Somehow Removed Files and now Windows Security Center Cannot be fully...

AMD Driver Update Somehow Removed Files and now Windows Security Center Cannot be fully...

AMD Driver Update Somehow Removed Files and now Windows Security Center Cannot be fully... - Similar Threads - AMD Driver Update

Windows Keeps Removing AMD Drivers

Windows Keeps Removing AMD Drivers

Windows Keeps Removing AMD Drivers

Windows Keeps Removing AMD Drivers

Windows Security Center is removed

Windows Security Center is removed

Windows Security Center is removed

Windows 10 update 2004 removed AMD Catalyst Control Center

AMD Drivers for Catylast Control Center