Windows 10: Another BSOD only on Cold Boot login (brand new PC)

Hello guys, another BSOD that happens only on boot!

I've just built a new computer, all parts are brand new.

I was having some BSOD during the boot. Then I turned off the Fast Boot option and I didn't get this BSOD anymore.

On the other hand, now I'm still facing a BSOD after logging Windows. The MEMORY_MANAGEMENT error happens only in a cold boot, a few minutes after logging in (I don't need to run anything special, just opening a Chrome browser and voi lá). After rebooting it works perfectly. Also, when it crashes, it stucks at 0%, so, I don't have a log to help understand the issue.

The tests I already did:

- Memtest86: ran twice, each of them 4 passes, and no issues were found. The free version doesn't allow me to run 8 passes as most people suggest. I tried to run Memtest86+, but my BIOS is UEFI, and I couldn't boot it.

- GPU stress test: ran FurMark (for about an hour) and Heaven Benchmark (both simple and heavy tests). None of them found issues. Also, my GPU is up-to-date with latest driver.

- HDD test: ran SeaTools on both disks and no issue was found.

- CPU: I'm running Prime95 heavy tests right now (for about 1.30h). No problems so far. How many hours should it run?

- Motherboard: updated BIOS and drivers to the last version (april/19). Problem was happening before BIOS update, and continues to happen after update.

- WiFi adapter: I started the computer without the WIFI adapter, just to make sure it wasn't faulty, but I still got the BSOD.

- Startup apps: I removed all non-windows apps on startup. Also didn't fix the problem.

I ran out of options. Can anybody help me isolate the issue, please? I still have a few days to return the faulty piece, but I

------
Spec:

AMD Ryzen 7 2700X
ZOTAC Gaming GeForce RTX 2060 Twin Fan Graphic Cards
GIGABYTE X470 AORUS Ultra Gaming
Corsair CP-9020122-NA CX Series 650 Watt 80 Plus Bronze Certified Non-Modular Power Supply
Corsair Vengeance LPX 16GB (2 X 8GB) DDR4 3000 (PC4-24000) C16 1.35V
SSD HP EX920 M.2 512GB PCIe 3.0 x4 NVMe 3D TLC NAND (for system and applications)
Seagate BarraCuda ST3000DM007 3TB 256MB Cache SATA 6.0Gb/s 3.5"
WISE TIGER Wifi Adapter Ac 600Mbps

- - - Updated - - -

I was checking again the Event View, and it says that the

Event is 41
BugcheckCode is 26 (0x1a)
BugcheckParameter1 is 0x41792 ("A corrupted PTE has been detected. Parameter 2 contains the address of the PTE. Parameters 3/4 contain the low/high parts of the PTE.").
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0

I've already enabled the driver check profile, but I'm running the PC after the BSOD (so, no errors after the cold boot). Maybe tomorrow morning, when I turn on the PC again, I will have the driver test result?

:)

 

Brand new build - different BSODS from a cold boot

1. Is your RAM on MSI compatible list ?
2. Did you install the latest Intel Chipset Drivers
3. Can you use another PSU if available ?
4. Check for latest firmware on the SSD.
5. On the cold boot. Look inside the MB and read the error code at the time of BSOD.

 

Memory Related BSOD Every Cold Boot

First let me list my specs:

Motherboard: Gigabyte Z370 Aorus Ultra Gaming

CPU: i7 8700k @ stock

RAM: 16GB Corsair Vengeance LPX DDR4 @ 2133 MHz

GPU: Gigabyte Aorus GTX 1080 TI

Storage: Samsung 840 EVO SSD (Windows Installed) 240GB

Seagate FireCuda 2TB HDD

Seagate Barracuda 2TB HDD

I cannot find anyone to help me with this problem, so when the i7 8700k came out I bought a new motherboard, RAM and the CPU. But ever since i installed the parts I am now plagued with Memory Management and Kernel Security Check BSODs on cold boots only,
it will keep giving me these errors seconds after the PC boots for almost a dozen times and then itll be fine until the next cold boot, if I restart the PC it wont give me the BSOD.

Ive reinstalled Windows 2 times but nothing, and I have tested the RAM multiple times with no errors and the PC is fine in Safe Mode.

I think it may be driver related but I dont know where to look.

 

BSOD DRIVER_POWER_STATE_FAILURE randomly after cold boot/sleep


For the past month I have been getting random BSOD's all with driver power state failure. They happen randomly, usually within the first 5-10 minutes of cold booting or waking my computer. Steps I have taken to attempt to fix the problem:

1. Reinstalled GPU drivers/ tried old drivers
2. Fresh installed Windows 1803, still happened, then fresh installed 1709
3. Disabled Fast Boot

None of these things fixed the issue, any help would be much appreciated at pinpointing the issue. Thanks