Windows 10: Another SSD issue - desktop computer

HI. I bought an SSD for my LAPTOP and with help from this forum got it installed correctly. Now I bought one for my desktop and I'm in trouble.
PC is a HP Model 260-p025, windows 10 home, OS 19041.508.
Here is what I did: migrated data from HDD to SDD (on USB) using Samsung Migration.
Disconnected HDD, plugged in SDD (not USB, but directly inside computer.
Powered on. Won't boot. I get the HP logo screen. Nothing happens. I hit enter and get this screen:


It says to press ESC, and I do, but nothing happens at all.
So then I detach SDD, reattach HDD, reboot. Hdd works fine. I then attach the SDD via USB to check it's contents.
I look first at disk manager. It shows the HDD and the SDD, but notice the new partition for SDD does not say BOOT Data.



But then I look at the files on the SDD and it mirror images exactly what is on HDD, even has a file called BOOT.



But It won't boot.
any ideas?
THANKSS

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Remote Desktop Issue - Remote computer reboots !

Hi Steve,

Have you tried updating your drivers? If not we suggest that you update the drivers. It is also possible that there
is a problem with the connection. Kindly check the connections too. If the issue persist, perform these following methods:

Method 1: Run the Hardware and Devices Troubleshooter.

To run the troubleshooter, follow these steps:

• 
  On the search bar, type Troubleshooting.
  
• 
  Choose
  Hardware and Devices.
  
• 
  Click on
  Hardware and Devices.
  

Method 2:
Run SFC Scan.

To run an
SFC scan, follow these steps:

• 
  Run
  Command Prompt as Administrator.
  
• 
  Type
  sfc /scannow
  and hit
  Enter.
  

This will check and run an auto-repair on the issue.

Method 3:
Run DISM Tool.

After running the
SFC scan
and the issue still persist, run the
DISM
to check the system health and to try restoring the files. To run
DISM tool, follow these steps:

• 
  Run
  Command Prompt as Administrator.
  
• 
  Type the following command:
  
  • 
    DISM.exe /Online /Cleanup-image /scanhealth
    
  • 
    DISM.exe /Online /Cleanup-image /Restorehealth
    

NOTE:
This might take a while
to finish scanning.
Do not cancel.

Let us know how it goes.

Regards.

 

Agonizing issues with SSD

Sounds like typical Sandforce hot-plugging BSOD issue.

What SSD are you using exactly ?
Is it in PC you've got listed in specs ?

Cheers,