Windows 10: Any fix for USB flash write that triggers Blue Screens after Win 10 Pro 20H2 upgrades?

I upgraded Windows 10 Pro to release 20H2 on my Assus-based PC on 3/14/2021 and since then, every time I try to write on USB flash drives I get blue screens with stop code: SYSTEM_SERVICE_EXCEPTION.


I already tried BIOS changes and checked the USB drivers but I cannot use any flash drive because of this. Write attempts are failing and corrupting the files system on the USB device.

:)

 

blue screen issue


after monthes of running system it was fine then on windows 7 it blue screened after looking it over myself and getting advice from local pc shop they suggest upgrading os will fix the issue so I upgraded to win 8.1 and along followed the blue screens now again upgrading after more advice I'm on win 10 and the bluescreens followed as a bad pool error rebooting I have included the requested report please help as spending the $150 the local pc shop wants is my next step

 

Upgrade stops at flashing blue screen

I know some people having flashing blue screen but that's after log in? Mine basically stops at the blue flashing screen before even getting to the Win 10 log in. I tried press ctrl + alt + del, for a few moments, I can see something looks like a Win 10
log in with a big 'window' and three buttons at the right bottom. However it quickly goes back to the flashing screen again.

Tech support suggests me back up the files and re-install win 7 then upgrade again. Well I'm not even be able to log in. How can I back up file now.....?!

Anyone had the similar problem?

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!