Windows 10: Any solution to high chipset temp

I have Asus tuf x570 motherboard and the chipset temp in idle is 74c and in load 90 c. I changed the TIM for the cooler and use noctua thermal paste but no difference. I tried to put another fan but also no difference. The only one that prevent reach 100c is to leave case side door open! any other solution ?

:)

 

Help!!! Are these temps high for my setup???

I suggested a cooler pull because that is one of the first steps in troubleshooting situations like this. In dozens of scenarios, the mounting or the paste would be the culprit. Once that was ruled out, then I'd suggest he check if his IHS was concave. He was asking for help, and what we suggested are the usual suspects and likely solutions. He didn't ask for help with a caveat that we shouldn't offer help if he wouldn't like what he found when troubleshooting.*Wink

So, at this point you have three choices. One, you can RMA with Intel because of the high temps. Two, you can lap the IHS. Three, you can just put up with the higher temps.

 

Windows temp profile

Hi..

I am facing the problem of temp profile login. I followed few steps stated in the websites like removing .bak from your SID. but it doesn't work. Still my profile is logging in to temp profile.

Please do suggest some solution

Thanks

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds