Windows 10: Anyone know why my wifi printer shows up twice in network?

It appears to be showing up under Other devices AND printers.

I'd love to make it not show up in other devices but if i click on it, it selects them both in tandem. Not that you can do much other than select View device page, create shortcut, or properties anyhow.

:)

 

Canon printer wifi trouble

Set a static IP on the printer else each time it switches off and on may get different ip which may not function correctly
Try
Delete the Printer after setting static ip

Devices and printer
>add printer
>>Add local printer (not network even though on wifi)
>>>Create new port - click standard Tcp/Ip
>>>>enter ip address of printer that set before and any port name
Select the printer driver from list

Try a test print to see if working then switch off and on and see if come back online

*66725-afb6e8cc8e67e4bb805a02c99165c983.jpg*

*66726-229a91b0c79f6b4bc0c7c78a49560e3f.jpg*
*66727-318c2547253e90800c3d464fca382dbe.jpg*

If still stays offline ,Open printer in Devices and printer
Click printer
untick use offline
turn printer off and On
*66728-2b757782bdfeb90ce43b66b06f017701.jpg*

See if comes back online

Network Printer can either be set by Ip address or Printer network name
Static ip always the best to set

 

Networked Printer showing "Offline"

Hey guys,

I'm having a slight issue with one of my printers in that it's showing offline and I can't print to it.

It's a Datamax label printer which is connected to my network via a Netgear print server, this has then be added to one of my servers for sharing etc.

So far I've tried the below.

- Classic on/off.
- Removing from server and re-adding.
- Ensuring that under port configuration SNMP Status is disabled.
- Assigning to different IP.
- Restarting Print Spooler.

I can ping it fine and the printer itself is letting me do manual test prints using its interface, but no matter what I cannot get it to stop showing up as offline and allowing me to print to it over the network. I should add that it's worked fine for the past year.

Any suggestions?

 

Printer visible on network but can't connect

Well I had done all of the suggested steps but in wrong order. I updated router firmware, but still couldn't see printer. When I then reinstalled the new driver I had downloaded, it located the printer and all is now running fine. How complex this can get!