Windows 10: Apple Thunderbolt 3 to 2 adapter not working

Now i have a Blackmagic Design Mini Recorder I need to use. And It only turns on on Old 2015-2017 MacBook devices, it used to work on my windows until i plugged it into my mac once and it did not work later. It is thunderbolt 2, so I got an adapter for it. And a 2m thunderbolt cable. I looked into the device manager and it gave me thisevice settings for USB\VID_05AC&PID_1657\DTN741300NSH2YFB6 were migrated from previous OS installation. Last Device Instance ID: USB\VID_05AC&PID_1657\DTN741300NSH2YFB6 Class GUID: {88bae032-5a81-49f0-bc3d-a4ff138216d6} Location Path: Migration Rank:

:)

 

Apple Thunderbolt Display with Dell XPS13 9360 with Thunderbolt 3 to 2 Adapter

Hi,

I have a Dell XPS 13 9360 and am hoping there is a way to use it with an Apple Thunderbolt display. I have purchased a Thunderbolt 3 to Thunderbolt 2 adapter but have had no luck. When I plug in the display through the adapter I get a message saying 'Thunderbolt
device functionality might be limited.' And then the display doesn't work.

I'm wondering whether perhaps there is a driver I can download, although I haven't been able to find one so far.

I've seen the odd post where people seem to have managed to get this to work but haven't gone into detail.

Any ideas?

Thanks

 

thunderbolt 3 to displayport adapter

Hi John,



Thank you for writing to Microsoft Community Forums.



I understand that inconvenience you are facing when the things may not work as expected.

1. What is the make and model of the computer?
   
   
   

When the Thunderbolt 3 is used with certain eighth generation Intel processor-based Windows 10 systems, there is a possibility that the two USB 3.0 ports on the back of the dock (closest to the Ethernet port)
may not be recognized properly by the operating system.





However, I would suggest you to follow the steps mentioned below and let us know if that helps.

1. Disconnect the pluggable Thunderbolt 3 dock from the system and remove its power cable to turn off completely.
   
2. Uninstall the Intel ‘Thunderbolt Software’ present on your system via the Control Panel ->
   Programs and Features and restart the device once.
   
3. Download and install the latest version of the Intel Thunderbolt Software published by your system manufacturer. If you are unable to obtain this download from your system manufacturer, you can download a version directly from Intel
   here -> https://downloadcenter.intel.com/do...-Driver-for-Intel-NUC-Kit-NUC8i7HNK-NUC8i7HVK
   
4. Restart the system once again.
   
5. Reconnect the power cable to the pluggable Thunderbolt 3 dock, and then reconnect the Thunderbolt 3 cable from the dock to your system.
   
6. You should be prompted to authenticate/approve the dock. Follow the onscreen prompts for the completion of the process and check the status of the issue.
   

If the issue still persists I suggest you to get in touch with the
Thunderbolt support for the further assistance.





Hope it helps.



Muralidhar

Microsoft Community Moderator

 

Apple Thunderbolt display always "Not connected"

I have a Matebook X Pro Signature Edition, with a thunderbolt port, running Windows 10 Home v2004.

I am trying to connect an Apple Thunderbolt display. I am using a thunderbolt 2 to thunderbolt 3 adapter.

Using the "Thunderbolt Software" app, I can see "Apple Inc, Thunderbolt Display" as an attached device to Port 1. It is listed as "Not connected".

Even if I use that same app to approve the device, it continues to list as "Not connected" and unapproved. I've run the "Thunderbolt software" app as administrator.

Any assistance gratefully appreciated.