Windows 10: Application Pop 56 + other errors

Hi


In the last 3 + weeks I am seeing my machine HANG in windows no blue screen just the Entire OS lock up requiring a hard reset to bring it back. This does not do it consistently and can do for 2-3 days before this happens again so I am not able to analyse any crash dump as there is none


The errors I am seeing are


The description for Event ID 56 from source Application Popup cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.



If the event originated on another computer, the display information had to be saved with the event.



The following information was included with the event:



ACPI

2



The message resource is present but the message was not found in the message table





and this warning is happening a lot logged previousls with Microsoft and they did not fix it



The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID

{2593F8B9-4EAF-457C-B68A-50F6B8EA6B54}

and APPID

{15C20B67-12E7-4BB6-92BB-7AFF07997402}

to the user MATTHEW\Matty SID S-1-5-21-1010005578-3490127429-4153470577-1001 from address LocalHost Using LRPC running in the application container Unavailable SID Unavailable. This security permission can be modified using the Component Services administrative tool.



and righter after application 56.


The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.


Microsoft support is rubbish on both occasions they have not helped so I am asking here.



I have done the follwing


1 Replace memorey from the PC shop brand new sticks and the machine did it again last night.

2 Run 3D Mark to try simulate it not able to simulate the same conditions.


This crashes in windows when the machine is NOT under load and during game this does not seem to occur at all which if it was memorey or GPU you would expect it to happen.


================================================================================================


SYSTEM INFORMATION


System Information report written at: 04/21/21 06:55:17

System Name: MATTHEW

[System Summary]



Item Value

OS Name Microsoft Windows 10 Pro

Version 10.0.19041 Build 19041

Other OS Description Not Available

OS Manufacturer Microsoft Corporation

System Name MATTHEW

System Manufacturer Gigabyte Technology Co., Ltd.

System Model Z490 GAMING X AX

System Type x64-based PC

System SKU Default string

Processor IntelR CoreTM i7-10700K CPU @ 3.80GHz, 3792 Mhz, 8 Cores, 16 Logical Processors

BIOS Version/Date American Megatrends Inc. F2, 19/05/2020

SMBIOS Version 3.2

Embedded Controller Version 255.255

BIOS Mode UEFI

BaseBoard Manufacturer Gigabyte Technology Co., Ltd.

BaseBoard Product Z490 GAMING X AX

BaseBoard Version y.y

Platform Role Desktop

Secure Boot State Off

PCR7 Configuration Binding Not Possible

Windows Directory C:\Windows

System Directory C:\Windows\system32

Boot Device \Device\HarddiskVolume3

Locale United States

Hardware Abstraction Layer Version = "10.0.19041.906"

User Name MATTHEW\Matty

Time Zone AUS Eastern Standard Time

Installed Physical Memory RAM 32.0 GB

Total Physical Memory 31.9 GB

Available Physical Memory 18.6 GB

Total Virtual Memory 36.7 GB

Available Virtual Memory 21.3 GB

Page File Space 4.75 GB

Page File C:\pagefile.sys

Kernel DMA Protection Off

Virtualization-based security Not enabled

Device Encryption Support Reasons for failed automatic device encryption: TPM is not usable, PCR7 binding is not supported, Hardware Security Test Interface failed and device is not Modern Standby, Un-allowed DMA capable bus/devices detected, TPM is not usable

Hyper-V - VM Monitor Mode Extensions Yes

Hyper-V - Second Level Address Translation Extensions Yes

Hyper-V - Virtualization Enabled in Firmware Yes

Hyper-V - Data Execution Protection Yes



=================================================================================================







:)

 

LogonUI.exe Application Error

Hi Anne,

There are several reasons why you are getting that error message when you wake up your computer. There may be an application that is causing this pop up message. To isolate this concern, may we know the following:

• Any changes made on the computer prior to this concern?
• What are the troubleshooting steps have you tried so far?

 

Can not find script file error

Hello,

This could be due to a missing script file or that an application is causing the error. As a first troubleshooting step, we suggest that you locate or navigate to the location listed in the error and see if the file it is looking for is there. If you are
unable to locate the file, an application is causing this error to pop-up. If that is the case, we suggest that you boot your PC in Safe Mode and see if the error still pops up. You may follow the steps on this
link on how to start your PC in Safe Mode.

If the problem does not exist in Safe Mode, we would know that an application is causing the error. However, if the problem is presented while in Safe Mode, the problem may be caused by Windows itself.

We look forward to an update from you.

 

Event Error 56 -Application Popup

I recently upgraded to Version 1803 (OS Build 17134.48), for Windows 10. While basically pleased that everything went well with and following the version update, I am left with one unresolved Event error ID 56, that I cannot find a solution for. Below is
a copy of the Event Details;

Log Name: System

Source: Application Popup

Date: 5/19/2018 6:56:41 AM

Event ID: 56

Task Category: None

Level: Error

Keywords: Classic

User: N/A

Computer: DESKTOP

Description:

The description for Event ID 56 from source Application Popup cannot be found. Either the

component that raises this event is not installed on your local computer or the installation

is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the

event.
The following information was included with the event:
ACPI

5
The message resource is present but the message was not found in the message table

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

<System>

<Provider Name="Application Popup" Guid="{47bfa2b7-bd54-4fac-b70b-29021084ca8f}"

EventSourceName="Application Popup" />

<EventID Qualifiers="49156">56</EventID>

<Version>0</Version>

<Level>2</Level>

<Task>0</Task>

<Opcode>0</Opcode>

<Keywords>0x80000000000000</Keywords>

<TimeCreated SystemTime="2018-05-19T13:56:41.273175700Z" />

<EventRecordID>3514</EventRecordID>

<Correlation />

<Execution ProcessID="4" ThreadID="208" />

<Channel>System</Channel>

<Computer>DESKTOP</Computer>

<Security />

</System>

<EventData>

<Data>

</Data>

<Data>ACPI</Data>

I have traced the GUID{47bfa2b7-bd54-4fac-b70b-29021084ca8f} referred to in the event log, changed permissions and ownership applied to the key, but that did not help. I also made a copy of the specific registry key, saved it, and deleted the key value
from the registry. The same event error 56 appeared at the following restart (boot up), so replaced deleted key value with saved copy. The full text of the indicated GUID={47bfa2b7-bd54-4fac-b70b29021084ca8f}, is :
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\ CurrentVersion\WINEVT\Publishers\{47bfa2b7-bd54-4fac-b70b-29021084ca8f} . While I have read this event is non-critical, it is the last and only event error I continually find, after resolving the continual
reappearance of Event Errors 10016, by changing permissions, and would be appreciative of any help in resolving this last annoying issue.